A district heating substation is a component in a district heating system that connects the main network to a building's own heating system.[1][2] [3]
YouTube Encyclopedic
-
1/2Views:1 211546
-
ComEd's Intelligent SubStation
-
Bunhill Heat and Power
Transcription
Parts
The station normally has one or more of the following parts:
- Heat exchanger - to split primary and secondary side of the system
- Control valve - to regulate the flow through the heat exchanger
- Heat meter - to measure energy consumption and allocate costs
- Strainer - to remove particles that could block heat exchanger or control valve
- Shut off valve - to stop the flow on primary side in case of service or emergency
- Differential pressure controller - to balance the network and improve working conditions of control valve
- Temperature controller - to control temperature on secondary side by regulating the flow on primary side
- Temperature sensor - to sense flow and return temperatures required for temperature control
Additional parts
In addition, a district heating substation may also include:
References
External links
This page was last edited on 25 February 2024, at 11:57