| CR-4 | |
|---|---|
| |
| CR-4 displayed at the EAA Airventure Museum | |
| Role | Racing aircraft |
| National origin | United States |
| Designer | Harry Crosby |
| First flight | April 1938 |
| Number built | 1 |
| Developed from | Crosby CR-3 |
The Crosby CR-4 is a racing aircraft developed in the late 1930s
Development
The Crosby CR-4 is the follow-on of the Menasco C6S-4 powered Crosby CR-3 (a.k.a. C6R-3) designed to be powered by a twelve-cylinder Ranger V-770 engine[1] The aircraft was designed while Crosby was recovering with a broken back and fractured skull from the 1936 crash of his all metal CR-3. Despite a prior failure causing a crash, money shortages prompted Crosby to reuse the Menasco C6S-4 engine from his former racer. Funding for construction came from fellow racer Kieth Rider. Students from the Curtiss-Wright Technical Institute in Glendale, California assembled the aircraft.[2]
Design
The CR-4 is a low-wing monoplane with conventional landing gear. The construction is all-metal stressed skin. The triangular wings featured a straight leading edge with a long chord tapering to a point at the wingtips. The left cowling held a combination oil tank and surface cooler. The seat and canopy adjusted up six inched in travel for take off and landing visibility. The landing gear used compressed air from a Lux air bottle rather than mechanical or hydraulic mechanism.[3] Copper filings found later in the line, combined with wind resistance prevented one leg from locking.[4]
Operational history
The first flight was performed in April 1938 at Mines Field with severe aileron flutter and a wheel collapse on landing.
- 1938 Greve races. Crosby landed while on fire in the 14th lap from an engine manifold that fell off in flight.[5]
- 1938 Thompson Trophy races. The CR-4 was repaired just in time for the race but landed with fuel leakage problems.
- 1939 Greve races. Crosby's landing gear failed to retract from a leaking compressed air tank. Crosby landed after 14 laps with a third-place finish.
- 1939 Thompson Trophy. Crosby finished fourth with engine troubles.
In late 1939, the CR-4 was filmed for use in the movie Tail Spin. In 1945, Crosby died while bailing out of a XP-79B. The CR-4 was sold by his wife to be restored by its new owner. The aircraft was placed in storage in a school bus until purchased by Morton Lester. Lester donated the airframe to the EAA Airventure museum in Oshkosh, Wisconsin, where it was restored and placed on display.[6]
Variants
- Crosby CIP-5 - With the onset of WWII, Crosby developed an all wood interceptor around the CR-4 design and its intended Twelve cylinder Ranger engine. Construction material was wood rather than the advanced all-metal design of the prior racers.[7]
Specifications (CR-4)
Data from Sport Aviation
General characteristics
- Crew: 1
- Length: 21 ft 6 in (6.55 m)
- Wingspan: 16 ft (4.9 m)
- Empty weight: 1,540 lb (699 kg)
- Powerplant: 1 × Menasco C6S-4 Inline, 260 hp (190 kW)
- Propellers: 2-bladed, 6 ft (1.8 m) diameter
Performance
- Maximum speed: 335 kn (386 mph, 621 km/h)
References
- ^ "Crosby CR-4". 10 March 2012.
- ^ John Underwood. Grand Central Air Terminal. p. 74.
- ^ John Underwood. Grand Central Air Terminal. p. 74.
- ^ Frank Sabo (March 1957). Experimenter: 14.
{{cite journal}}: Missing or empty|title=(help) - ^ AAHS Journal (54): 290.
{{cite journal}}: Missing or empty|title=(help) - ^ "Crosby CR-4". 10 March 2012.
- ^ Birch Matthews. Race with the wind: how air racing advanced aviation. p. 109.
This page was last edited on 11 August 2023, at 03:23