Correlated double sampling (CDS[1]) is a method to measure electrical values such as voltages or currents that allows removing an undesired offset. It is often used when measuring sensor outputs. The output of the sensor is measured twice: once in a known condition and once in an unknown condition. The value measured from the known condition is then subtracted from the unknown condition to generate a value with a known relation to the physical quantity being measured.
This is commonly used in switched-capacitor operational amplifiers to effectively double the gain of the charge sharing opamp, while adding an extra phase.
When used in imagers, correlated double sampling is a noise reduction technique in which the reference voltage of the pixel (i.e., the pixel’s voltage after it is reset) is subtracted from the signal voltage of the pixel (i.e., the pixel’s voltage at the end of integration) at the end of each integration period, to cancel kTC noise (the thermal noise associated with the sensor's capacitance).
YouTube Encyclopedic
-
1/3Views:904 8434056 682 218
-
Look at the REAL Human Eye | #shorts #eyes
-
Marivi Fernandez Serra - Machine learning to improve the exchange and correlation functional in DFT
-
Behind the Scene of the Class after becoming Parents || Work Life Balance ||
Transcription
See also
References
- ^ Donati (2000). Photodetectors: Devices, Circuits and Applications. NJ: Prentice-Hall. ISBN 0130203378.
 | This electronics-related article is a stub. You can help Wikipedia by expanding it. |
This page was last edited on 30 November 2023, at 14:27