Continuous flight augering (CFA), also known as auger cast piling, is a technique used in construction to create a concrete deep foundation.
Continuous flight auger has been used in the United Kingdom since 1966,[1] but its use is relatively new in the United States. A continuous flight auger drill is used to excavate a hole and concrete is injected through a hollow shaft under pressure as the auger is extracted. Reinforcement is then inserted after the auger is removed.[2] This creates a continuous pile without ever leaving an open hole.
Continuous flight augering can be used to construct a secant piled wall which can be used as a retaining wall or as shoring during excavation. Once initial piles are set with concrete, other shafts are augured between them, slicing into the original piles, with the new ones receiving rebar. The finished result is a continuous wall of reinforced concrete that aids and protects workers during excavation.
YouTube Encyclopedic
-
1/3Views:5456801 004
-
CFA Piling 8/9 - What are the forces acting on the auger in Continuous Flight Auger Piling Method
-
CFA Piling 5/9 - What do you need for Continous Flight Auger Piling Method
-
CFA Piling 4/9 - Advantages and Disadvantages CFA Continous Flight Auger Piling Method
Transcription
References
- ^ "CFA Piling". Simplex Westpile. Retrieved 2015-07-21.
- ^ "London Piling | The No.1 piling contractors in London". London Piling | The No.1 piling contractors in London. Retrieved 2015-12-08.
This page was last edited on 27 November 2019, at 07:47