To install click the Add extension button. That's it.

The source code for the WIKI 2 extension is being checked by specialists of the Mozilla Foundation, Google, and Apple. You could also do it yourself at any point in time.

4,5
Kelly Slayton
Congratulations on this excellent venture… what a great idea!
Alexander Grigorievskiy
I use WIKI 2 every day and almost forgot how the original Wikipedia looks like.
Live Statistics
English Articles
Improved in 24 Hours
Added in 24 Hours
Languages
Recent
Show all languages
What we do. Every page goes through several hundred of perfecting techniques; in live mode. Quite the same Wikipedia. Just better.
.
Leo
Newton
Brights
Milds

Combustion tap-off cycle

From Wikipedia, the free encyclopedia

Diagram of the open-cycle combustion tap-off rocket cycle. A small portion of exhaust from the combustion chamber is tapped off to power the turbine(s).

The combustion tap-off cycle is a power cycle of a bipropellant rocket engine. The cycle takes a small portion of hot exhaust gas from the rocket engine's combustion chamber and routes it through turbopump turbines to pump fuel before being exhausted (similar to the gas-generator cycle). Since fuel is exhausted, the tap-off cycle is considered an open-cycle engine. The cycle is comparable to a gas-generator cycle engine with turbines driven by main combustion chamber exhaust rather than a separate gas generator or preburner.[1]

The J-2S rocket engine, a cancelled engine developed by NASA, used the combustion tap-off cycle and was first successfully tested in 1969.[2]

By 2013, Blue Origin, with their New Shepard launch vehicle, had successfully flight-tested the BE-3 engine using a tap-off cycle. According to Blue Origin, the cycle is particularly suited to human spaceflight due to its simplicity, with only one combustion chamber and a less stressful engine shutdown process. However, engine startup is more complicated, and due to the hot gas fed from the main combustion chamber into the turbopumps, the turbine must be built to withstand higher-than-normal temperatures.[3] In contrast, the upper-stage variant of the BE-3, the BE-3U, uses an expander cycle to power the turbopump, and will be used on the upper stage of the New Glenn launch vehicle.[4]

The Reaver 1 engine in Firefly Alpha uses a tap-off cycle.[5] It first flew in September 2021[6] then made it to orbit on its second attempt in October 2022.[7]

YouTube Encyclopedic

  • 1/3
    Views:
    930
    133 745
    305 331
  • I2ocket_Talk, Ep.1: Combustion Tap-Off Cycle
  • RS E04: Combustion Cycles
  • Expander Cycle Rocket Engines - Using Waste Heat To Drive Your Rocket

Transcription

See also

References

  1. ^ Sutton, George (November 2005). History of Liquid Propellant Rocket Engines. American Institute of Aeronautics & Astronautics. ISBN 978-1563476495.
  2. ^ "Altitude Developmental Testing of the J-2S Rocket Engine" (PDF). Defense Technical Information Center. Defense Technical Information Center. Archived from the original (PDF) on January 16, 2017.
  3. ^ Norris, Guy (9 December 2013). "Blue Origin Tests New Engine". Aviation Week & Space Technology. Penton. Retrieved 3 February 2016.
  4. ^ BE-3 test update, Blue Origin, 10 August 2018, accessed 15 August 2018].
  5. ^ "Tour Firefly Aerospace's Factory and Test Site With Their CEO, Tom Markusic". Retrieved 12 October 2021.
  6. ^ Neal, Mihir (2 September 2021). "Firefly Aerospace's maiden flight of Alpha launch vehicle ends in failure". NASASpaceFlight. Retrieved 12 October 2021.
  7. ^ Trevor, Sesnic (1 October 2022). "Firefly succeeds on second Alpha flight". NASASpaceFlight.
This page was last edited on 8 October 2022, at 06:29
Basis of this page is in Wikipedia. Text is available under the CC BY-SA 3.0 Unported License. Non-text media are available under their specified licenses. Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc. WIKI 2 is an independent company and has no affiliation with Wikimedia Foundation.