Combined gas and steam (COGAS) is a type of marine compound powerplant comprising gas and steam turbines, the latter being driven by steam generated using the heat from the exhaust of the gas turbines.
YouTube Encyclopedic
-
1/3Views:22 57762 745358 067
-
Combined Steam And Gas Turbine Power Plant
-
Combined Cycle Power Plant Animation
-
Siemens’ Flex-Plants™ - Flexible Combined Cycle Power Generation
Transcription
System
| Combined marine propulsion |
|---|
|
CODOG |
In this way, some of the otherwise lost energy can be reclaimed and the specific fuel consumption of the plant can be decreased. Large (land-based) electric powerplants built using this combined cycle can reach conversion efficiencies of over 60%.[1]
If the turbines do not drive a propeller shaft directly and instead a turbo-electric transmission is used, the system is known as COGES (combined gas turbine-electric and steam).
COGAS differs from many other combined marine propulsion systems in that it is not intended to operate on one system alone. While this is possible, it will not operate efficiently this way, as with Combined diesel and gas systems when run solely on diesel engines. Especially COGAS should not be confused with Combined steam and gas (COSAG) power plants, which employ traditional, oil-fired boilers for steam turbine propulsion for normal cruising, and supplement this with gas turbines for faster reaction times and higher dash speed.
COGAS has been proposed as upgrade for ships that use gas turbines as their main (or only) engines, e.g. in COGOG or COGAG mode, such as the Arleigh Burke-class destroyers, but currently no naval ship uses this concept. However some modern cruise ships are equipped with COGES. E.g. Celebrity Cruises' Millennium and other ships of her class use turbo-electric plants with two General Electric LM2500+ gas turbines and one steam-turbine.
BMW is currently[when?] researching combined gas and steam for automotive use, using their turbosteamer system. This uses the waste heat of combustion from the exhaust and turns it into steam to produce torque which is input into the crankshaft.[citation needed]
See also
References
- ^ "World's Most Efficient Combined-Cycle Power Plant". GE Power. Retrieved 2018-06-17.
External links
- Gizmag article discussing BMW's turbosteamer
- Article on BMW's alternative Combined Cycle Hybrid technology
This page was last edited on 6 March 2024, at 15:18