To install click the Add extension button. That's it.

The source code for the WIKI 2 extension is being checked by specialists of the Mozilla Foundation, Google, and Apple. You could also do it yourself at any point in time.

Kelly Slayton
Congratulations on this excellent venture… what a great idea!
Alexander Grigorievskiy
I use WIKI 2 every day and almost forgot how the original Wikipedia looks like.
Live Statistics
English Articles
Improved in 24 Hours
Added in 24 Hours
What we do. Every page goes through several hundred of perfecting techniques; in live mode. Quite the same Wikipedia. Just better.

Cadillac V8 engine

From Wikipedia, the free encyclopedia

V8 engine
Cadillac OHV V-8, early fifties (24311977458).jpg
A 331 series V8 from the 1950s
ManufacturerCadillac (General Motors)
Also calledType 51, Monobloc, LaSalle, Northstar, Blackwing
Configuration90° V8
  • 244 cu in (4.0 L)
  • 267 cu in (4.4 L)
  • 279 cu in (4.6 L)
  • 307 cu in (5.0 L)
  • 314 cu in (5.1 L)
  • 322 cu in (5.3 L)
  • 341 cu in (5.6 L)
  • 346 cu in (5.7 L)
  • 350 cu in (5.7 L)
  • 353 cu in (5.8 L)
  • 365 cu in (6.0 L)
  • 368 cu in (6.0 L)
  • 376 cu in (6.2 L)
  • 390 cu in (6.4 L)
  • 425 cu in (7.0 L)
  • 429 cu in (7.0 L)
  • 472 cu in (7.7 L)
  • 500 cu in (8.2 L)
Cylinder bore
  • 3.125 in (79.4 mm)
  • 3.375 in (85.7 mm)
  • 3.38 in (85.9 mm)
  • 3.5 in (88.9 mm)
  • 3.8 in (96.5 mm)
  • 4 in (101.6 mm)
  • 4.082 in (103.7 mm)
  • 4.125 in (104.8 mm)
  • 4.3 in (109.2 mm)
Piston stroke
  • 3.875 in (98.4 mm)
  • 4 in (101.6 mm)
  • 4.06 in (103.1 mm)
  • 4.304 in (109.3 mm)
  • 4.5 in (114.3 mm)
  • 4.94 in (125.5 mm)
  • 5.125 in (130.2 mm)
Block materialCast iron
Head materialCast iron
Compression ratio8.5:1, 10.0:1, 10.5:1
SuperchargerWith intercooler (In 4.4 L & 6.2 L LSA engines)
TurbochargerTwin-turbo (In 4.2 L engine)
Fuel system
Fuel typeGasoline
Cooling systemWater-cooled
Power output70–550 hp (52–410 kW)
Torque output265–550 lb⋅ft (359–746 N⋅m)
Dry weight595 lb (270 kg)

The term Cadillac V8 may refer to any of a number of V8 engines produced by the Cadillac Division of General Motors since it pioneered the first such mass-produced engine in 1914.[1]

Most commonly, such a reference is to one of the manufacturer's most successful, best known, or longest-lived 90° V8 engine series. These include the pioneering overhead valve 331 cu in (5.4 L) cu in introduced in 1949, made in three displacements up to 390 cu in (6.4 L); a 390 cu in (6.4 L) introduced in 1963 that grew to 429 cu in (7.0 L); and a 472 cu in (7.7 L) introduced in 1968 and enlarged to 500 cu in (8.2 L). Also notable was the Northstar, which debuted in 1992 as a 4.6 litre, and was also produced in 4.4 L and 4.2 L versions.

When the Northstar engine series ended production in 2010 it became the last General Motors division to retain its own proprietary V8 design. This changed when Cadillac created the twin-turbo 'Blackwing' engine in 2019.


Type 51, 1915
Type 51, 1915

The Type 51 was the first Cadillac V8. Introduced in 1914, it was the standard engine for 1915 Cadillac models. It was a 90° design with an L-head (sidevalve) configuration and was water-cooled. Bore and stroke was 3.125 in × 5.125 in (79.4 mm × 130.2 mm), for a total of 314 cu in (5.1 L) of displacement. Output was 70 hp (52 kW).

This engine was designed under the leadership of Cadillac's chief engineer (1914-1917), Scottish-born D (D'Orsay) McCall White (1880 -), later a vice president of Cadillac.[2] Hired by Henry Leland for his V-engine expertise from his employment as chief engineer at Napier, and previously Daimler at Coventry, he was later to move to Nash with LaFayette. White was appointed to a committee of three to supervise the development of the V12 Liberty aircraft motor, that later contributed to cross town rival Lincoln Motor Company introducing the Lincoln L series much later in 1917.[3]

The engine was refined for 1923 with a cross-plane crankshaft that introduced the (now standard) 90° offset for each pair of cylinders which improved balance and smoothness. Power was up to 83.5 hp (62.3 kW).

The L-head was on the Ward's 10 Best Engines of the 20th century list.

L-head applications:

Cadillac created a new V8, the 341, for 1928. It was a 341 cu in (5.6 L) engine and produced 90 hp (67 kW). The same year saw the introduction of the synchromesh transmission. This engine was used in the Series 341 and 341B cars of 1928 and 1929.

From 1930 through 1935, Cadillac produced a version with an increased displacement of 353 cu in (5.8 L). This used a 3.38 in × 4.94 in (85.9 mm × 125.5 mm) bore and stroke. This engine was used in the Cadillac Series 353 and Series 355.


A 322 cu in (5.3 L) "monobloc engine" was used in 1936's Series 60. It was designed to be the company's next-generation powerplant at reduced cost from the 353 and Cadillac V12. The monobloc's cylinders and crankcase were cast as a single unit,[4] and it used hydraulic valve lifters for durability. This design allowed the creation of the mid-priced Series 60 line.

Bore and stroke was 3.375 in × 4.5 in (85.7 mm × 114.3 mm). This engine was modified with a 3.5 in (88.9 mm) bore for the 1936-1948 346 cu in (5.7 L) engine. This was used in the Series 60/60S/61/62/63/65/67 and 70/72/75. It was also used in tanks, e.g. M5 Stuart and the M24 Chaffee, in World War II mated to a Hydramatic transmission.


1937 LaSalle V-8 engine detail
1937 LaSalle V-8 engine detail

In 1937, the new monobloc flathead gained 24 cu in (390 cc) in Cadillac V-8 models to 346 cu in (5.7 L), while the LaSalle straight-8 of 1934–1936 that originated from Oldsmobile actually was replaced with the 1936 smaller 322 cu in (5.3 L) version at 125 hp (93 kW). In 1941, the LaSalle nameplate was phased out along with the 322 cu in (5.3 L), and Cadillacs, all 346 cu in (5.7 L) powered, were available with the new Hydramatic automatic transmission which debuted in Oldsmobile the previous year. These engines were produced through 1948.


331 series

For 1949, Cadillac and Oldsmobile each produced a new V8 design (the Oldsmobile engine was the 303). Both of the engines were overhead valve designs, pioneered by Buick. The Cadillac 331 engine featured a "dry" (coolant exited through an assembly attached directly to the cylinder heads), open runner (requiring the use of a tappet valve cover) intake manifold, rear-mounted distributor, and shaft-mounted rockers. Crankshaft end play is carried by the rear bearing on the two GM engines. It has the lighter 'skirtless' block where the oil pan flange does not descend appreciably below the crankshaft centerline and they both have a partial integral cast iron clutch housing that compares to the early Chrysler Hemi V8 design. 1955 331 engines went to a lighter "flat back" that bolted to a clutch and flywheel housing at the front of the transmission.

Bore and stroke are 3+1316 in × 3+58 in (96.8 mm × 92.1 mm) for an overall displacement of 331.1 cu in (5.4 L). This engine features an oiling system which uses a central cast-in passage between the lifter galleries feeding oil to the cam and crank by grooves machined into the cam bores. A single drilled passage per bearing saddle feeds both cam and crank journals. Shared with the Oldsmobile Rocket V8 is how the lifters are supplied oil through small 'bleeds' instead of placing the lifters directly into the right and left side oil supply galleries. Many early racers would replace the Cadillac hydraulic lifter and rocker assemblies with the solid lifters and adjustable rockers from the Studebaker V8 for operation at higher engine speeds.


Displacement was increased to 365 cu in (6.0 L) for 1956 by increasing the bore to 4 inches (101.6 mm) while maintaining the 3+58 in (92.1 mm) stroke. The 1958 Eldorado 3-2bbl version produced 335 hp (250 kW).


A longer, 3+78 in (98.4 mm) stroke pushed displacement to 389.6 cu in (6.4 L) for 1959, yielding 325 hp (242 kW), while the Eldorado Tri-power reached 345 hp (257 kW).

390 series

1962 Cadillac Series 62 390 V8 engine
1962 Cadillac Series 62 390 V8 engine

For the 1963 model year Cadillac redesigned its V8 engine, modernizing the tooling used in the production line while optimizing the engine's design. Although it shared the same layout and architecture with the 1949-vintage engine, the revised engine had shorter connecting rods and was 1 in (25 mm) lower, 4 in (101.6 mm) narrower, and 1.25 in (32 mm) shorter. The accessories (water pump, power steering pump, distributor) mounted on a die-cast aluminum housing at the front of the engine for improved accessibility. An alternator replaced the former generator. The crankshaft was cored out to make it both lighter and stronger. The revised engine was 52 lb (24 kg) lighter than its predecessor, for a total dry weight of 595 lb (270 kg).

The revised engine shared the same 4 in × 3.875 in (101.6 mm × 98.4 mm) bore and stroke of its predecessor, for an unchanged displacement of 390 cu in (6.4 L). Power was unchanged at 325 hp (242 kW), as was torque at 430 lb⋅ft (583 N⋅m).


For 1964 the engine had a 4.125 in × 4 in (104.8 mm × 101.6 mm) bore and stroke, raising displacement to 429 cu in (7.0 L). Power rose to 340 hp (254 kW) and torque to 480 lb⋅ft (651 N⋅m). It also included its first emission control system, a positive crankcase ventilation unit was installed beginning in the 1964 model year. The 429 was used through the 1967 model year. (It is not uncommon to find an early 1964 model year with the '63 390 V8 as Cadillac tried to use up the older engines in stock.)

472 series

Cadillac introduced an all-new engine for 1968. Although the modernized 390 series engine was compact and light for its displacement and output, 429 cu in (7.0 L) represented the limit of the original architecture's expansion, and it had been surpassed by Chrysler's 440 and Lincoln's 462 and 460. Cadillac went bigger - with provision for even more expansion.

At introduction, the new engine had a 4.3 in × 4.06 in (109.2 mm × 103.1 mm) bore and stroke for a displacement of 472 cu in (7.7 L). "Extensively redesigned" to ease maintenance, it used 10% fewer parts and 25% fewer gasketed joints as before.[5] It delivered 375 hp (280 kW) at 4400 rpm and a massive 525 lb⋅ft (712 N⋅m) torque at just 3000 rpm. The new engine was about 80 lb (36 kg) heavier than its predecessor. It was used through 1974. It was designed with potential for a 500-cubic-inch (8.2 L) displacement.


For 1970 Cadillac fitted a crankshaft with a 4.304 in (109.3 mm) stroke, increasing total displacement on the engine to 500.02 cu in (8.2 L). At its introduction it was rated at 400 hp (298 kW), SAE gross, and 550 lb⋅ft (746 N⋅m) of torque. For 1971 compression was reduced from 10.0:1 to 8.5:1, the lowered compression ratio dropped the 500's gross output from 400 bhp (298 kW) to 365 bhp (272 kW), or 235 hp (175 kW) in the new SAE net ratings. By 1976, its final year, it had fallen to 190 hp (142 kW). However, a new Bendix electronic fuel injection system was offered as an option, and it increased power output to 215 hp (160 kW). The 500 was exclusive to the Eldorado until 1975 where the powerplant was standard in all Cadillacs except for the Seville, which was powered by a fuel-injected Oldsmobile 350.

Year Engine VIN code Engine letter code Displacement Rated horsepower Rated torque Bore x stroke Compression ratio Oil pressure
1968–1969 None None 472 cu in (7.7 L) 375 hp (280 kW)
@ 4400 rpm
525 lb⋅ft (712 N⋅m) @ 3000 rpm 4.3 in × 4.06 in (109.2 mm × 103.1 mm) 10.5:1 33 psi (2.3 bar)

(SAE gross)

10.0:1 35–40 psi (2.4–2.8 bar)
500 cu in (8.2 L) 400 hp (298 kW)
@ 4400 rpm
550 lb⋅ft (746 N⋅m) @ 3000 rpm 4.3 in × 4.304 in (109.2 mm × 109.3 mm)

(SAE gross)

R 61E,Q 472 cu in (7.7 L) 345 hp (257 kW)
@ 4400 rpm
500 lb⋅ft (678 N⋅m) @ 2800 rpm 4.3 in × 4.06 in (109.2 mm × 103.1 mm) 8.5:1
S 500 cu in (8.2 L) 365 hp (272 kW)
@ 4400 rpm
535 lb⋅ft (725 N⋅m) @ 2800 rpm 4.3 in × 4.304 in (109.2 mm × 109.3 mm)

(SAE net)

R 62E,Q 472 cu in (7.7 L) 220 hp (164 kW)
@ 4400 rpm
365 lb⋅ft (495 N⋅m) @ 2400 rpm 4.3 in × 4.06 in (109.2 mm × 103.1 mm) 35 psi (2.4 bar)
S 500 cu in (8.2 L) 235 hp (175 kW)
@ 4400 rpm
385 lb⋅ft (522 N⋅m) @ 2400 rpm 4.3 in × 4.304 in (109.2 mm × 109.3 mm)
1973 R 63E,Q 472 cu in (7.7 L) 220 hp (164 kW)
@ 4400 rpm
365 lb⋅ft (495 N⋅m) @ 2400 rpm 4.3 in × 4.06 in (109.2 mm × 103.1 mm)
S 500 cu in (8.2 L) 235 hp (175 kW)
@ 4400 rpm
385 lb⋅ft (522 N⋅m) @ 2400 rpm 4.3 in × 4.304 in (109.2 mm × 109.3 mm)
1974 R 64E,Q 472 cu in (7.7 L) 205 hp (153 kW)
@ 4400 rpm
380 lb⋅ft (515 N⋅m) @ 2400 rpm 4.3 in × 4.06 in (109.2 mm × 103.1 mm)
S 500 cu in (8.2 L) 210 hp (157 kW)
@ 3600 rpm
380 lb⋅ft (515 N⋅m) @ 2000 rpm 4.3 in × 4.304 in (109.2 mm × 109.3 mm)
1975 65E,Q
1976 66E,Q 190 hp (142 kW)
@ 3600 rpm
360 lb⋅ft (488 N⋅m) @ 2000 rpm

425 series

Starting in the mid to late 1970s Cadillac expanded its product range offering more mid sized vehicles, i.e. sedans and coupes. While initially the Cadillac Seville for example, which was positioned in the mid sized segment used a variant of 350 cu in (5.7 L) Oldsmobile based architecture V8, Cadillac also began work on its own proprietary engines.[6][7]

In 1977 Cadillac introduced a new 425 cu in (7.0 L) V8, based on the architecture of the 472, but with a smaller, 4.082 in (103.7 mm) bore and the same 4.06 in (103.1 mm) stroke. The new engine was also 100 lb (45 kg) lighter.

The 425 was offered in L33 form, with a four-barrel carburetor, producing 180 hp (134 kW) at 4000 rpm and 320 lb⋅ft (434 N⋅m) of torque at 2000 rpm, and L35 with electronic multi-port fuel injection for 195 hp (145 kW) and 320 lb⋅ft (434 N⋅m) of torque, but peaked at 2400 rpm.

The 425 was used through 1979 on all Cadillacs except the Seville and 1979 Eldorados.


In 1980 the 425 was replaced with the L61, which was the same basic 472 family engine de-bored to 3.8 in (97 mm) but retaining the 472 and 425 engines' 4.06 in (103.1 mm) stroke for a total displacement of 368 cu in (6.0 L). The reduction in displacement was largely an effort to meet CAFE requirements for fuel economy. Throttle-body fuel injection was now standard on Eldorado and Seville when equipped with the 368. Rear-wheel drive cars and the Commercial Chassis for hearse and ambulance builders used the Rochester Quadrajet 4-barrel carburetor.

Cadillac referred to this new TBI (throttle-body fuel injection) system as Digital fuel injection (DFI); this particular induction system was later adopted by other GM divisions, except on Oldsmobile V8s, and was used well into the 1990s on GM trucks.

Power output dropped to 145 hp (108 kW) at 3600 rpm and torque to 270 lb⋅ft (366 N⋅m) at 2000 rpm in DEFI forms as used on the front-wheel drive Seville and Eldorado but 150 hp (112 kW) on the 4-barrel Quadrajet-equipped RWD models. This engine was standard on all Cadillacs except the redesigned Seville, in which it was optional.


For 1981 Cadillac introduced a new engine that would become notorious for its unreliable electronics, the V8-6-4 (L62). The L61 had not provided a significant improvement in the company's CAFE numbers, so Cadillac and Eaton Corporation devised a cylinder deactivation system called Modulated Displacement that would shut off two or four cylinders in low-load conditions such as highway cruising, then reactivate them when more power was needed. When deactivated, solenoids mounted to those cylinders' rocker arm studs would disengage the fulcrums, allowing the rockers to "float" and leave the valves closed despite the continued action of the pushrods. These engines are easily identified by their rocker covers, which each have elevated sections over 2 cylinders with electrical connectors on top. With the valves closed the cylinders acted as air-springs, which both eliminated the feel of "missing" and kept the cylinders warm for instant combustion upon reactivation. Simultaneously, the engine control module would reduce the amount of fuel metered through the TBI unit. On the dashboard, an "MPG Sentinel" digital display could show the number of cylinders in operation, average or current fuel consumption (in miles per gallon), or estimated range based on the amount of fuel remaining in the tank and the average mileage since the last reset.[8]

Another rare and advanced feature introduced with DFI was Cadillac's truly "on-board" diagnostics. For mechanics who had to deal with the 368s, the cars contained diagnostics that did not require the use of special external computer scan-tools. The new Electronic Climate Control display, along with the MPG Sentinel, provided on-board readout of any stored trouble codes, instantaneous readings from all the various engine sensors, forced cycling of the underhood solenoids and motors, and on the V8-6-4 engines, manual cylinder-pair control. The L62 produced 140 hp (104 kW) at 3800 rpm and 265 lb⋅ft (359 N⋅m) at 1400 rpm. Cadillac hailed the L62 as a technological masterpiece, and made it standard equipment across the whole Cadillac line.

While cylinder deactivation would make a comeback some 20 years later with modern computing power (and using oil pressure to deactivate the valves by collapsing the lifters) Cadillac's 1981 V8-6-4 proved to have insurmountable engineering problems. The main issue was that the Engine Control Module simply lacked the robustness, programming and processing speed to efficiently manage the cylinder-deactivation under all load conditions. In the era before electronically operated EGR valves, the engineers also made an error in using a "back-pressure-type" EGR valve. While this early effort to match the vacuum-controlled EGR volume more accurately to the engine's load made sense in a 'normal' engine, it had the effect of causing pinging (detonation) problems in the V8-6-4 engine, because 4 cylinders operating under higher load needed more EGR, while they were actually producing less exhaust flow and therefore less back-pressure to operate the valve.

In an effort to increase reliability, Cadillac issued thirteen updated PROM chips for the ECMs, but many of these engines simply had their Modulated Displacement function disabled by dealers, leaving them with permanent eight-cylinder operation. This was accomplished by merely disconnecting a single wire from the transmission's "3rd-gear switch", or running it through a switch inside the car for manual override. The 368 was dropped from most Cadillac passenger cars after the 1981 model year, although the V8-6-4 remained the standard engine for Fleetwood Limousines and the carbureted 368 remained in the Commercial Chassis through 1984.

The 368 has the distinction of being the last traditional "big-block" cast-iron pushrod V8 engine available in a production car. It lasted through 1984 in the limousines. Rival big blocks, 396, 400 (Chrysler & GM), 402, 426, 440, 454, 455, 460, etc. disappeared between 1976 and 1978. RWD models were coupled with the heavy duty THM400 transmission, the last factory-produced GM passenger car fitted with this transmission.

Cadillac High Technology engine

The OHV Cadillac High Technology engine was produced from 1982 to 1995 in displacements of 4.087 L (249.4 cu in), 4.467 L (272.6 cu in), and 4.893 L (298.6 cu in).


Cadillac's DOHC, four valves per cylinder Northstar debuted in 1992, its most technologically advanced engine ever.

Although Oldsmobile, Pontiac, and Buick have borrowed the Northstar architecture for their V8 (and even V6) engines, it was not until the 2004 Pontiac Bonneville that a non-Cadillac used the Northstar name.

The Northstar has been produced in 4.6 L; 278.6 cu in (4,565 cc), 4.4 L; 266.7 cu in (4,371 cc), and 4.0 L; 243.8 cu in (3,995 cc) versions:

4.6 L

The 4.6 L; 278.6 cu in (4,565 cc) 275 hp (205 kW) version was available starting in 1993 on the Seville SLS and Eldorado ESC. The Allante, the Seville STS and the Eldorado ETC had the 300 hp (224 kW) version of the Northstar. In 1994, the DeVille Concours received the 270 hp (201 kW) version of this engine. By 1996, the Northstar engine became standard equipment in the front-wheel-drive Cadillac line. The 275 hp (205 kW) engine was in the Seville SLS 1993–2004, Eldorado ESC 1993–2002, Standard Deville 1996–2005, Devile d'elegance 1997–1999, and Deville DHS 2000–2005. The 300 hp (224 kW) version was used in the Seville STS 1993–2004, Eldorado ETC 1996–2002, Deville Concours 1997–1999, and Deville DTS 2000–2005. Its final appearance was in the final generation of the DTS series, produced from 2006 to 2011.

Non-Cadillac uses:

The 275 hp (205 kW) version of the Northstar was also standard equipment in the top GXP trim level of the Pontiac Bonneville, produced only in 2004 and 2005. It was also the top engine option available in the Buick Lucerne CXS and a 292 hp (218 kW) NHP (Northstar High Output) version in the Buick Lucerne Super. produced from 2006 through 2011. The Lucerne shared its platform and the Detroit/Hamtramck assembly plant with the final generation of the Cadillac DTS.[9]

4.4 L

The 4.4 L; 266.7 cu in (4,371 cc) versions were all supercharged, exclusive to Cadillac's V-series. The present STS-V engine, since 2006, produces 469 hp (350 kW) and 439 lb⋅ft (595 N⋅m) under the SAE certified rating system.

The 2006 - 2008 XLR-V uses the same supercharged Northstar V8 as the STS-V, though output is down somewhat due to design changes made to accommodate the model's more limited underhood space. For the XLR-V, the SAE certified output is 443 hp (330 kW) and 414 lb⋅ft (561 N⋅m). The supercharger and four intercoolers are built into the intake manifold.

The bores were reduced in size to increase block strength, increasing the safety margin under boost.

4.0 L

The 4.0 L; 243.8 cu in (3,995 cc) is the Oldsmobile Aurora variant, never installed in a Cadillac. The Aurora's cylinder heads had lower flow characteristics to match the engine's reduced size. This engine produces 250 hp (186 kW).

Cadillac use of non-Cadillac V8s

Fleetwood (RWD)/Deville (RWD)/Brougham (RWD)

The 1976 through 1979 Seville was only available with Oldsmobile engines. (The engine was "marketed" as a Cadillac engine and was exclusive to the Cadillac product line, but was in reality produced by the Oldsmobile division). Buyers were able to choose between 350 gas and 350 diesel versions. From 1982 to 1985, all rear-wheel drive Cadillacs (except for the limousines) could be ordered with the 350 cu in (5.7 L) Oldsmobile LF9 Diesel V8. In fact, for most of its life, the 1980-1985 version of Cadillac's Seville came standard with Oldsmobile's V8 diesel, with the gas engine being a no-cost option.

From 1986 to 1990, the rear-wheel drive Cadillac Brougham used a carbureted 307 cu in (5.0 L) Oldsmobile V8 (replacing the Cadillac HT-4100). In 1990 a 175 hp (130 kW), fuel-injected small-block 350 cu in (5.7 L) Chevrolet L05 V8 (became a Regular Production Option (RPO) when the towing package was selected. In 1991 the Oldsmobile 307 was replaced with a 305 cu in (5.0 L) throttle body fuel-injected small-block Chevrolet L03 V8 - same powerplant used in Chevrolet's Caprice and C/K light trucks). In 1993 the 180 hp (134 kW) 350 cu in (5.7 L) L05 V8 became standard in the newly renamed Cadillac Fleetwood. In 1994 the L05 was replaced with an iron headed small-block Chevrolet Corvette LT1 V8 with 260 hp (194 kW), which the Fleetwood used until discontinued at the end of the 1996 model year.

With the introduction of the Escalade to the Cadillac lineup, the small-block Chevrolet L31 V8 (Vortec 5700) was used, as it was part of the Chevy truck line on which the Escalade was based. In 2001, the new redesigned Escalade picked up the performance version of the 6.0 L Generation III series engine (RPO code LQ9). Since 2007, all Cadillac Escalades have been equipped with Generation IV 6.2 L engines. This new engine option is shared with the GMC Yukon/Yukon XL Denali.


The 2004 to 2005 Cadillac CTS-V used the previous generation Corvette C5 Z06's 400 hp (298 kW) 5.7 L LS6 V8. The 2006 and 2007 CTS-V uses the 400 hp (298 kW) 6.0 L LS2 V8, similar to that used in the standard Corvette C6.The 2009-2015 CTS-V carries a supercharged 6.2 L LSA variant, producing at least 556 hp (415 kW), while the 2016-2019 model carries a supercharged 6.2 L LT4 with 640 hp (477 kW).

Cadillac 4.2 liter twin-turbo V-8 LTA engine

The 4.2 liter V8 engine (GM RPO code LTA) is an eight-cylinder, dual overhead cam (DOHC) twin turbo engine produced by General Motors specifically for use in Cadillac luxury vehicles. The engine is the result of a new clean-sheet engine design as well as Cadillac's first twin-turbo V-8 engine. It first launched on the 2019 Cadillac CT6.[10]

See also

From the 1950s through the 1970s, each GM division had its own V8 engine family. Some were shared among other divisions, but each respective design was engineered and developed by its own division:

GM later standardized on the later generations of the Chevrolet design:


  1. ^ "Cadillac - 100 Years of Innovation and Progress - Pioneering technical achievements". Cadillac Pressroom (Press release). January 1, 2009.
  2. ^ Cadillac puts White in Vice-Presidency, Automobile Topics October 13, 1917 Volume 47
  3. ^ Derby, White, ed's,The National Cyclopædia of American Biography: Volume 17 pp. 320-321 White & Co, New York, 1921
  4. ^ Cadillac LaSalle Club of Australia, Peter's 1939 La Salle
  5. ^ Ludvigsen, Karl. "Cadillac: The Great American Dream Come True", in Northey, Tom, ed. World of Automobiles (London: Orbis, 1974), Vol. 3, p.297
  6. ^ John Gunnell (March 10, 2014). "Vintage V8s: Exploring 100 Years of Cadillac Engines". Engine Builder. Retrieved July 17, 2021.
  7. ^ Don Sherman (July 25, 2014). "Century Club: The 100-Year History of Cadillac V-8s". Car and Driver. Archived from the original on July 27, 2014. Retrieved July 17, 2021.
  8. ^ Sessler, Peter C., Ultimate American V-8 Engine Data Book. MBI Publishing Company, 2010, p. 23. ISBN 978-0-7603-3681-6
  9. ^ Source: Edmunds
  10. ^ "Cadillac 4.2 Liter Twin-Turbo V-8 LTA Engine". GM Authority. 21 March 2018. Retrieved 18 April 2018.
This page was last edited on 18 June 2022, at 08:23
Basis of this page is in Wikipedia. Text is available under the CC BY-SA 3.0 Unported License. Non-text media are available under their specified licenses. Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc. WIKI 2 is an independent company and has no affiliation with Wikimedia Foundation.