To install click the Add extension button. That's it.

The source code for the WIKI 2 extension is being checked by specialists of the Mozilla Foundation, Google, and Apple. You could also do it yourself at any point in time.

4,5
Kelly Slayton
Congratulations on this excellent venture… what a great idea!
Alexander Grigorievskiy
I use WIKI 2 every day and almost forgot how the original Wikipedia looks like.
Live Statistics
English Articles
Improved in 24 Hours
Added in 24 Hours
What we do. Every page goes through several hundred of perfecting techniques; in live mode. Quite the same Wikipedia. Just better.
.
Leo
Newton
Brights
Milds

Bridge No. 1132

From Wikipedia, the free encyclopedia

Bridge No. 1132
LocationCT 80 at Hammonasset River, Killingworth and Madison, Connecticut
Coordinates41°21′26″N 72°36′45.19″W / 41.35722°N 72.6125528°W / 41.35722; -72.6125528
Arealess than 1 acre (0.40 ha)
Built1934 (1934)
ArchitectOsborn-Barnes Construction Co.
Architectural styleopen-spandrel concrete arch
NRHP reference No.04001091[1]
Added to NRHPSeptember 29, 2004

Bridge No. 1132 is an open-spandrel concrete arch bridge carrying the two-lane Connecticut Route 80 across the Hammonasset River, between Killingworth and Madison, Connecticut. Built in 1934, it is one of a small number of open-spandrel concrete bridges in the state, and was noted for its aesthetics at the time of its construction. It was listed on the National Register of Historic Places in 2004.[1]

YouTube Encyclopedic

  • 1/3
    Views:
    1 442
    1 452
    1 153
  • martin d15 bridge shave mitchels plate mate install part 1of3
  • Surprising Water Bridge Physics | Bouyancy And Boats
  • EIFFEL TOWER IN CHINA?!

Transcription

Description and history

Bridge No. 1132 is located in western Killingworth and eastern Madison, spanning the Hammonasset River south of Lake Hammonasset. The bridge spans a steep wooded ravine, with its main arch spanning 100 feet (30 m). There are three concrete girder spans on each side of the main arch, giving the structure an overall length of 231 feet (70 m). The road deck is 30 feet (9.1 m) wide, but the arches supporting it are only 20 feet (6.1 m) apart, with concrete ribs projecting to the sides of the arches for additional support. There are eight supporting concrete beams rising in each spandrel area of the arches.[2]

The bridge was designed by the Connecticut Highway Department and built by the Osborn-Barnes Construction Company of Danbury, Connecticut, in 1934. It was highlighted by the Highway Department for its scenic location. The state typically only built open-spandrel bridges for particularly long spans, or sites such as this one with steep sides. This bridge replaced an older one that had been located further down the ravine; its construction thus eliminated steep approaches on what is a major east-west roadway.[2]

See also

References

  1. ^ a b "National Register Information System". National Register of Historic Places. National Park Service. March 13, 2009.
  2. ^ a b Bruce Clouette (March 31, 2003). "NRHP Inventory-Nomination: Bridge No. 1132". National Park Service. and Accompanying six photos, from 2003 (see photo captions page 11 of text document)

External links

This page was last edited on 24 September 2022, at 18:23
Basis of this page is in Wikipedia. Text is available under the CC BY-SA 3.0 Unported License. Non-text media are available under their specified licenses. Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc. WIKI 2 is an independent company and has no affiliation with Wikimedia Foundation.