To install click the Add extension button. That's it.

The source code for the WIKI 2 extension is being checked by specialists of the Mozilla Foundation, Google, and Apple. You could also do it yourself at any point in time.

4,5
Kelly Slayton
Congratulations on this excellent venture… what a great idea!
Alexander Grigorievskiy
I use WIKI 2 every day and almost forgot how the original Wikipedia looks like.
Live Statistics
English Articles
Improved in 24 Hours
Added in 24 Hours
Languages
Recent
Show all languages
What we do. Every page goes through several hundred of perfecting techniques; in live mode. Quite the same Wikipedia. Just better.
.
Leo
Newton
Brights
Milds

Bonomi BS.10 Ardea

From Wikipedia, the free encyclopedia

BS.10 Ardea
Role Single seat competition glider
National origin Italy
Manufacturer Aeronautica Bonomi
Designer Camillo Silva
First flight 1934
Number built 1

The Bonomi BS.10 Ardea (English: Great Heron) was an Italian single seat high performance glider, designed and built in the mid-1930s. Only one was built.

Design and development

The BS.10 Ardea was an attempt to improve upon the popular BS.2 Balestrucchio of 1932. Like the Balestruccio, the Ardea was a high gull wing aircraft but with increased span and aspect ratio and less gull dihedral. The two spar wing was built from three panels, the straight edged central one having constant chord. The outer panels straight tapered to elliptical tips, with trailing edges entirely occupied by ailerons. The outer ends of the centre section were braced, as on some other Bonomi gliders, with a pair of faired, asymmetric steel V-struts, mounted on the lower fuselage immediately below the forward wing spar. The wing was mounted over the fuselage on a short, faired pedestal.[1]

The Ardea had a deep sided, hexagonal cross-section fuselage, entirely plywood skinned. Its pilot sat in a small, deep cockpit, head against the front of the pedestal and partly protected from the airstream by the upper fuselage panels, which both lifted off for entry. There was a conventional single skid undercarriage under the forward fuselage aft to the wing trailing edge, with a small tailskid. The fuselage tapered gently to the tail, where a large, roughly elliptical balanced rudder, mounted on a much smaller fin, extended down to the keel. The Ardea's balanced elevators together formed a slender ellipse in plan, though with a cut-out for rudder movement.[1]

The BS.10 flew for the first time in 1934,[1] and was first registered in September of that year. By November it was registered to the Royal Italian Aero Club, Rome.[2] Only one was built.


Specifications

Data from Pedrielli (2011) p.87[1]

General characteristics

  • Crew: One
  • Length: 6.79 m (22 ft 3 in)
  • Wingspan: 19.00 m (62 ft 4 in)
  • Wing area: 17.60 m2 (189.4 sq ft)
  • Aspect ratio: 20.50
  • Empty weight: 140 kg (309 lb)
  • Gross weight: 220 kg (485 lb)

Performance

  • Maximum glide ratio: 26:1 estimated
  • Rate of sink: 0.53 m/s (104 ft/min) [3]
  • Wing loading: 12.50 kg/m2 (2.56 lb/sq ft)


References

  1. ^ a b c d Pedrielli, Vincenzo; Camastra, Francesco (2011). Italian Vintage Sailplanes. Königswinter: EQIP Werbung & Verlag GmbH. pp. 86–87. ISBN 978 3 9808838 9 4.
  2. ^ Air Britain: pre-war Italian register (Malcolm Fillmore)
  3. ^ Zuerl, Hubert (1941). Segelflug im Wettbewerb der Völker. Berlin: E. S. Mittler & Sohn. pp. 38, 42.
This page was last edited on 15 May 2022, at 09:08
Basis of this page is in Wikipedia. Text is available under the CC BY-SA 3.0 Unported License. Non-text media are available under their specified licenses. Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc. WIKI 2 is an independent company and has no affiliation with Wikimedia Foundation.