To install click the Add extension button. That's it.

The source code for the WIKI 2 extension is being checked by specialists of the Mozilla Foundation, Google, and Apple. You could also do it yourself at any point in time.

4,5
Kelly Slayton
Congratulations on this excellent venture… what a great idea!
Alexander Grigorievskiy
I use WIKI 2 every day and almost forgot how the original Wikipedia looks like.
Live Statistics
English Articles
Improved in 24 Hours
Added in 24 Hours
What we do. Every page goes through several hundred of perfecting techniques; in live mode. Quite the same Wikipedia. Just better.
.
Leo
Newton
Brights
Milds

Barry Railway Class K

From Wikipedia, the free encyclopedia

Barry Railway Class K
Type and origin
Power typeSteam
DesignerJ. H. Hosgood
BuilderCooke Locomotive and Machine Works, Paterson, New Jersey, USA
Build date1899
Total produced5
Specifications
Configuration:
 • Whyte0-6-2T
 • UICC1 n2t
Gauge4 ft 8+12 in (1,435 mm) standard gauge
Driver dia.4 ft 3 in (1.295 m)
Trailing dia.3 ft 6 in (1.067 m)
Wheelbase15 ft 5 in (4.699 m)
Loco weight56 long tons 5 cwt (126,000 lb or 57.2 t) (63.0 short tons)
Fuel typeCoal
Boiler pressure160 psi (1.10 MPa)
CylindersTwo outside
Cylinder size18 in × 26 in (457 mm × 660 mm)
Valve typeRichardson
Performance figures
Tractive effort22,030 lbf (97.99 kN)
Career
Operators
NicknamesYankees
Delivered1899
Withdrawn1927–1932
DispositionAll scrapped

Barry Railway Class K were 0-6-2T steam tank engines of the Barry Railway in South Wales. They were designed by J. H. Hosgood and built by an American company, Cooke Locomotive and Machine Works of Paterson, New Jersey. At the time the Barry wanted to order these locomotives, British manufacturers already had a full order book. In order not to face an indefinite wait, invitations to tender were advertised in the United States. Hosgood's aim was to have a tank engine equivalent to the “Class B1”. However, because of his desire for a speedy delivery, he agreed to certain compromises in the design. The order was placed in April 1899 and was delivered later that year. Like the 0-8-2 tank locomotives Cooke built for the Port Talbot Railway and Docks Company around the same time, the engines had the clean lines and uncluttered appearance of British practice, but had bar frames, the front buffer beam separate from the footplate, as well as cylinder and saddle designs typical of American practice.

Traffic duties

Although originally intended for hauling main line mineral traffic, they proved to be very heavy on coal and water and therefore not a feasible prospect for this kind of work. They were therefore assigned other duties. Two of the class were sent to Hafod shed for banking duties on trains on the gradients between Trehafod Junction and Pontypridd and between Treforest Junction and Tonteg. The other three were assigned to hauling coal trains between Cadoxton Yard and Barry Docks. Later on, two of these were assigned to Hafod, joining the first two, for banking duties and the fifth was retained at Barry as shed pilot.

Heavy on coal and water

When tests were originally carried out, it was found necessary to stop two or three times while taking empty wagons up to the Rhondda. According to one driver, it was not advisable to pass a single water column for fear of running short before the next one.

Special train

Every year, on Good Friday, the Directors would organise an orchestral concert in Barry and arrange a special train from Trehafod to carry the company's employees and their families to the concert. As the "K Class" was vacuum fitted, they were the only engines stationed at Hafod shed suitably equipped to haul a passenger train. This tradition took place in the early 1900s.

Withdrawal

The locomotives passed to the Great Western Railway in 1922 but were withdrawn between 1927 and 1932. None survived into British Railways ownership, much less into preservation.

Numbering

Year Quantity Manufacturer Serial numbers Barry numbers GWR numbers Notes
1899 5 Cooke Locomotive and Machine Works 2482–2486 117–121 193–197

References

  • Barrie, D. S. M. (1983). The Barry Railway (reprint with addenda and amendments). Oakwood Press. p. 198. ISBN 0853612366.
  • Davies, F. K.; Firth, J. M.; Lucking, J. H.; Thomas, R. E.; Allcock, N. J.; Sterndale, A. C.; Barrie, D. S. M.; Reed, P. J. T.; Mountford, E. R. (April 1966). White, D. E. (ed.). The Locomotives of the Great Western Railway, part ten: Absorbed Engines, 1922–1947. RCTS. pp. K46–K47. ISBN 0-901115-20-7.
  • Miller, Brian J. (1984). Rails to Prosperity – The Barry & After 1884–1984. Regional Publications (Bristol) Ltd. pp. 18–19. ISBN 0906570174.
  • Mountford, Eric R. (1987). The Barry Railway – Diagrams and Photographs of Locomotives, Coaches and Wagons. Headington: Oakwood Press. p. 18. ISBN 0853613559.
  • Russell, J. H. (1978). Great Western Absorbed Engines. Oxford Publishing Company. pp. 45–46. ISBN 0902888749.
This page was last edited on 8 January 2023, at 11:49
Basis of this page is in Wikipedia. Text is available under the CC BY-SA 3.0 Unported License. Non-text media are available under their specified licenses. Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc. WIKI 2 is an independent company and has no affiliation with Wikimedia Foundation.