To install click the Add extension button. That's it.

The source code for the WIKI 2 extension is being checked by specialists of the Mozilla Foundation, Google, and Apple. You could also do it yourself at any point in time.

4,5
Kelly Slayton
Congratulations on this excellent venture… what a great idea!
Alexander Grigorievskiy
I use WIKI 2 every day and almost forgot how the original Wikipedia looks like.
Live Statistics
English Articles
Improved in 24 Hours
Added in 24 Hours
Languages
Recent
Show all languages
What we do. Every page goes through several hundred of perfecting techniques; in live mode. Quite the same Wikipedia. Just better.
.
Leo
Newton
Brights
Milds

From Wikipedia, the free encyclopedia

BSA Scout
Nine open 2-seater 1935 series I
Overview
ManufacturerBSA Cycles Limited[1]
Productionearly 1935[1]
AssemblyBirmingham[2]
Body and chassis
Classsports car
Body styleopen 2-seater, open 4-seater, coupé
LayoutFMF[1]
Powertrain
Engine1,075 cc 4-cylinder in-line sv[1]
Transmissionthree-speed manual gearbox,[1] multi-plate clutch with a worm final drive. From the differential assembly a short universally jointed propeller shaft runs out transversely to each front wheel
Dimensions
Wheelbase2-seater 90 in (2,300 mm)
4-seater 93 in (2,400 mm))
coupé 93 in (2,400 mm)
Length2-seater 135 in (3,400 mm)
4-seater 146 in (3,700 mm))
coupé 140 in (3,600 mm)
Width52 in (1,300 mm)
Height2-seater 54+12 in (1,380 mm)
4-seater 57 in (1,400 mm))
coupé 54+12 in (1,380 mm)
Kerb weight2-seater 11 long cwt 2 qr (1,290 lb or 580 kg)
4-seater 12 long cwt 2 qr (1,400 lb or 640 kg)
coupé 14 long cwt 0 qr (1,570 lb or 710 kg)
Nine engine
Overview
ManufacturerBSA Cycles Limited
Production1933? to 1936
Layout
Configuration4-cylinder in-line[1]
Displacement1,075 cubic centimetres (66 cu in)[1]
Cylinder bore60 mm (2.4 in)[1]
Piston stroke95 mm (3.7 in)[1]
Cylinder block materialcast iron, in one piece with crankcase
Cylinder head materialcast iron, detachable
Valvetrainside-valve
Combustion
Fuel systemSolex carburettor, mechanical pump from 10 gallon tank at rear
Oil systemgear type pump by skew gears from crankshaft
Cooling systemwater
Output
Power outputnot reported
Tax rating 8.9 h.p.
Suspension, transmission brake and differential
Ten engine
Overview
ManufacturerBSA Cycles Limited
Production1936 to 1939
Layout
Configuration4-cylinder in-line[3]
Displacement1,203 cubic centimetres (73 cu in)[3]
Cylinder bore63.5 mm (2.50 in)[3]
Piston stroke95 mm (3.7 in)[3]
Cylinder block materialcast iron, in one piece with crankcase
Cylinder head materialcast iron, detachable
Valvetrainside-valve, camshaft driven by duplex chain[4]
Combustion
Fuel systemSolex carburettor, (optional twin an extra five guineas), mechanical pump from 10 gallon tank at rear (6 gallons on four-seater and coupé)[4]
Fuel typepetol (tank has a quick-action filler cap)
Oil systemgear type pump by skew gears from crankshaft, de luxe tourer and coupé cars have an oil-pressure-warning green light on the dashboard, other cars have a pressure gauge[4]
Cooling systemwater
Output
Power outputnot reported
Tax rating 9.8 h.p.

The BSA Scout is a small open two-seater front-wheel drive car, manufactured and sold by subsidiaries of The Birmingham Small Arms Company Limited, launched at the beginning of April 1935. On account of its front-wheel drive and low centre of gravity it was said to be remarkably stable taking corners in safety which would be impossible with a normal design.[1] This new addition to the range of small open cars for young motorists was intended to further embellish BSA's reputation for sound design, robust construction and complete reliability.[5]

YouTube Encyclopedic

  • 1/3
    Views:
    44 137
    5 503
    24 409
  • Build a Winning Pinewood Derby Car: Step By Step
  • BSA SCOUT RANK REQUIREMENT 2C
  • How To Make a Fast Pinewood Derby Car: The Most Important and Worthwhile Tips

Transcription

Mechanicals

At the front of the car was the engine, clutch, gearbox and a short stiff propeller shaft to the worm and spur driven differential and front wheel brake. All these mechanicals were (flexibly[6]) mounted as one unit positioned in a reverse to the usual order, the differential at the very front of the car.

Engine

The car's four-cylinder, 9 (RAC) horsepower 1,075 cc (65.6 cu in) engine and transmission had powered thousands of BSA three-wheelers over the previous five years.[1]

Transmission

The gearbox was centrally controlled by a lever in the facia providing three forward speeds and reverse[1] The propeller shafts from the differential to each wheel had flexible fabric joints and enclosed universal joints. The multi-plate clutch had two light alloy discs with cork inserts and ran in oil.[4]

Chassis

The conventionally designed chassis was made of channel section side members suitably braced by cross members.[4] Suspension was by eight quarter-elliptic springs in front—four to each wheel giving independent front springing.[1]

Rear suspension was by ordinary half-elliptical springs to a beam axle.
The single brake for the front wheels was a part of the differential unit. The rear brakes were on each wheel.[3]

Electrical equipment was six-volt and a five lamp set supplied with dip and switch control to the head lights was included.[4] The tyre size is 4+12 by 18 inches (110 mm × 460 mm).

Bodies

The pneumatic cushioned upholstery was leather and the frame of the body of ash panelled in aluminium.[4] An open two-seater it had attractive and sporting lines yet with enough leg and elbow room.[1]

During 1936 an open four-seater sports tourer body also became available at £169.10.0.[3][6] and a two-seater coupé complete with recessed traffic indicators, sunshine roof and other closed car fittings: £185.[6] These bodies became known as series 3.

A new two-seater drophead coupé was announced in August 1939 (similar to the car which won the coachwork award in the Welsh Rally. The price was to be £195[7]

Price

Initially (open two-seater) £149.10.0[1]

Performance

The car was built for speeds approaching 70 mph (110 km/h). Petrol consumption was expected to be an average of 35 to 40 miles per imperial gallon (8.1 to 7.1 L/100 km; 29 to 33 mpg‑US).[1]

Series 2 – Engine upgrade

For the October 1936 Earls Court Motor Show the engine capacity was increased to 1,203 cc (73.4 cu in).[3]

Series 3 – variants of 2

Also for the October 1936 Motor Show—either a two-seater coupé by Mulliners or a 4-seater open tourer on the same chassis as the 2-seater named series 2.[3][6]

Series 4 – August 1937

Shock absorbers were fitted all round. Front braking was now by brakes on the front wheels.[4]

  • The price of the two-seater and the two-seater de luxe had been reduced to £149.10.0 and £156.10.0 respectively.[4]
  • Four-seater £159.10.0[4]
  • Four-seater de luxe £166.10.0[4]
  • Coupé de luxe £179. The coupé was now only available with the de luxe equipment.[4]

The motoring correspondent of The Times described the two-seater as "a rakish looking body with two wide cut-away doors with cord-operated locks and pockets. The floor is flat and unobstructed, there is luggage space in the tonneau behind the squab with a cover, and the hood folds down completely when it is concealed. There is a single panel safety glass folding screen with a curved top line and the detachable side screens are stored behind the squab. The instruments are in front of the driver with a good-sized cupboard and grabrail on the left."[4]

"The coupé two-seater is of airline type and there is a bench type of seat with adjustment to the back and good luggage space behind. A sliding roof, safety glass windows, a windscreen which can be wound out, a rear blind, ventilators in the side of the scuttle, large headlamps with stone guards, a spare wheel, door locks, a sports spring steering wheel, flush fitting traffic indicators, a roof light and an inside reflecting mirror are included."[4]

Series 5

A switch to a more powerful 12-volt electrical system and to Bendix cable brakes.[8]

Series 6 – October 1938

Easy-clean (pressed steel) wheels are now fitted in place of the wire wheels. The coupé is now a 4-seater. The 9.8 engine has been redesigned, water-jacketing has been increased and a three-bearing crankshaft incorporating improved lubrication is now provided. Induction improvements include larger valves and a downdraught carburettor. The front and rear tracks are now the same—4 ft 0 in (1.22 m) and the wheelbase of all cars is now 7 ft 11+14 in (2.419 m).[9]

A new drophead coupé 2-seater was announced on 1 August 1939[10] but war broke out on 3 September and very few of these cars were made.

References

  1. ^ a b c d e f g h i j k l m n o p A New B.S.A. Car. The Times, Tuesday, 2 April 1935; pg. 6; Issue 47028
  2. ^ Annual General Meeting, Birmingham Small Arms Company. The Times, Wednesday, 11 November 1936; pg. 24; Issue 47529.
  3. ^ a b c d e f g h The Motor Show. The Times, Friday, 16 October 1936; pg. 7; Issue 47507.
  4. ^ a b c d e f g h i j k l m n Cars Of 1938. The Times), Monday, 30 August 1937; pg. 16; Issue 47776
  5. ^ Chairman's address, AGM, Birmingham Small Arms Company. The Times, Wednesday, 13 November 1935; pg. 19; Issue 47220
  6. ^ a b c d Cars Of 1937. The Times, Monday, 14 September 1936; pg. 8; Issue 47479
  7. ^ Popularity Of Open Cars. The Times, Tuesday, 1 August 1939; pg. 10; Issue 48372.
  8. ^ The Times, 3 November 1937; pg. 22; Issue 47832
  9. ^ The Times, Friday, 14 October 1938; pg. 7; Issue 48125
  10. ^ The Times, 1 August 1939; pg. 10; Issue 48372

External links

This page was last edited on 7 April 2023, at 03:33
Basis of this page is in Wikipedia. Text is available under the CC BY-SA 3.0 Unported License. Non-text media are available under their specified licenses. Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc. WIKI 2 is an independent company and has no affiliation with Wikimedia Foundation.