Adelaide–Wolseley railway line

Adelaide-Wolseley railway line
Overview
Owner	Australian Rail Track Corporation
Termini	Adelaide Wolseley
Continues from	Adelaide-Port Augusta line
Continues as	Western standard gauge line
Service
Services	Belair Line The Overland
Operator(s)	Journey Beyond Aurizon Pacific National SCT Logistics
History
Opened	1887
Reopened	1995 (standardised)
Technical
Line length	313 km (194 mi)
Number of tracks	1
Track gauge	1,435 mm (4 ft 8+1⁄2 in) standard gauge
Old gauge	1,600 mm (5 ft 3 in)
Route map km to Port Augusta Gawler line Outer Harbor & Grange lines Adelaide 0.0 3.4 Mile End loop, datum point 3.8 Adelaide Parklands Terminal Seaford & Flinders lines Belair line 21.5 Belair loop Bridgewater line closed 1987 37.2 Bridgewater 39.9 Ambleside tunnel 42.6 Ambleside loop 45.8 Balhannah loop Mount Pleasant line closed 1963 50.0 Mount Barker Junction loop SteamRanger to Victor Harbor 62.4 Petwood loop 71.4 Callington loop 82.2 Monarto South loop Sedan line closed 2000s 96.6 Murray Bridge 39.9 Karoonda Highway tunnel River Murray 104.0 Monteith loop 120.9 Tailem Bend loop & Aurizon Yard 120.3 Tailem Bend Loxton line closed 2015 Pinnaroo line closed 2015 153.4 Coomandook loop 183.4 Coonalpyn loop 211.3 Tintinara loop 228.4 Coombe loop 248.5 Keith loop 273.0 Wirrega loop 293.9 Bordertown 307.5 Wolseley loop Mount Gambier line closed 1995 313.2 463.6 South Australia Victoria border, datum point 461.5 Serviceton to Melbourne via North Shore broad gauge standard gauge [1] This diagram: view talk edit

The Adelaide–Wolseley railway line is a 313 kilometre line running from Adelaide to Wolseley on the Australian Rail Track Corporation network.^[2][3] It is the South Australian section of the Melbourne–Adelaide railway.

History

The line opened in stages: on 14 March 1883 from Adelaide to Aldgate, on 28 November 1883 to Nairne, on 1 May 1886 to Bordertown and on 19 January 1887 to Serviceton.^[4] The line consisted of double track as far as Belair, where it became single track for the remainder of the journey east. Along its 313 km length, there are 18 crossing loops.^[3] In 1995, the track was converted to standard gauge as part of the gauge conversion of the line to Melbourne. This included one of the lines west of Belair, effectively converting this section to two single lines. In 2009, the Belair line was relaid with dual gauge sleepers that will allow it to be converted to standard gauge in the future.^[5][6]

Originally operated by South Australian Railways, in March 1978, it was transferred to Australian National and in July 1998 to the Australian Rail Track Corporation. Until April 1987, the State Transport Authority services then operated on the first 37 kilometres of the line from Adelaide to Bridgewater, when they were curtailed to Belair, the terminus of today's Adelaide Metro Belair line.^[7] TransAdelaide succeeded the STA in operating the line in 1994.

Route

Major towns on the route include Murray Bridge, Tailem Bend, Keith and Bordertown.^[2]

Services

Today the route is mainly served by interstate freight services operated by Pacific National and SCT Logistics. Intrastate grain freight services from the Loxton and Pinnaroo lines operated by Genesee & Wyoming Australia ceased operating in July 2015.^[8] Grain services from Tailem Bend and Wolseley run regularly via Aurizon trains.

Journey Beyond's The Overland is the only scheduled passenger service to traverse the full route, calling at Murray Bridge and Bordertown stations.^[9] Adelaide Metro services operate from Adelaide to Belair.^[7]

References

This page was last edited on 10 December 2023, at 11:17