The 6AQ5[1] (Mullard–Philips tube designation EL90) is a miniature 7-pin (B7G) audio power output pentode vacuum tube with ratings virtually identical to the 6V6 at 250 V.[2] It was commonly used as an output audio amplifier in tube TVs and radios. It was also used in transmitter circuits.[3] There are versions of this tube with extended ratings for industrial application which are designated as 6AQ5A[4] (with controlled heater warm-up characteristic), and 6AQ5W/6005[5] or 6005W (shock and vibration resistant).
A push–pull pair is capable of producing at least 10W audio output power in class AB1.
Also, in some cases it was used as vertical deflection output tube during the 1950s, being also rated for this purpose. For this application, 6AQ5-A was preferred. It was used for 70- and 90-degree picture tubes, but also in some early colour sets in the frame output.
Other close or equivalent tube types are: 6HG5, 6HR5, 6669, 6BM5, N727, CV1862 and the Tesla 6L31. The 6CM6,[6] like the Russian 6P1P (6П1П),[7] while electrically equivalent (up to 250 V anode voltage), have a 9 pin (B9A) base. Another similar, but not identical, amplifier pentode with a miniature 9-Pin base (B9A), used in consumer electronics was the 6M5.
See also
References
- ^ Datasheet 6AQ5, General Electric Beam Pentode, June 1955, from tubezone.net
- ^ Tomer, Robert (1960). Getting the Most Out of Vacuum Tubes. Photofact Publication. p. 97.
- ^ Busch, R.T. (October 1933). "The Amateur Emergency Network of the W.1.A. (Victorian Division)". Complete Australian Amateur Radio Magazine. Wireless Institute of Australia.
- ^ Datasheet 6AQ5A, RCA Beam Power Tube, Nov. 1958
- ^ Datasheet 6005/6AQ5W, CSF Tétrode a faisceaux dirigé, March 1957 (in French)
- ^ Datasheet 6CM6, Sylvania Beam Power Pentode, Jan. 1956
- ^ Datasheet 6П1П, CCCP Output Beam Tetrode, 1970 (in Russian and English)
External links
 | This electronics-related article is a stub. You can help Wikipedia by expanding it. |
This page was last edited on 27 December 2023, at 02:49