ISO 10007 "Quality management — Guidelines for configuration management" is the ISO standard that gives guidance on the use of configuration management within an organization.[1][2] "It is applicable to the support of products from concept to disposal."[3] The standard was originally published in 1995, and was updated in 2003 and 2017. Its guidance is specifically recommended for meeting "the product identification and traceability requirements" introduced in ISO 9001:2015[4] and AS9100 Rev D.[1]
YouTube Encyclopedic
-
1/5Views:1 9713991 369393584
-
ISO 21500
-
ISO-Normen im Projektmanagement
-
AS9100D 2016 Key Changes
-
💲ISO 10014:2021💱 Orientación obtener beneficios económicos y financieros Sistemas de gestión Calidad
-
norma ISO 10012
Transcription
Basic principles
ISO 10007 defines a configuration as "interrelated functional and physical characteristics of a product or service as described in the configuration information."
It defines a configuration item as "entity within a configuration that satisfies an end use function".
It defines a configuration baseline as "approved configuration information that establishes the characteristics of a product or service at a point in time that serves as reference for activities throughout the life cycle of the product or service".
It defines configuration status accounting as "formalized recording and reporting of configuration information, the status of proposed changes and the status of the implementation of approved changes".
The standard outlines the responsibilities and authorities and describes the configuration management process that includes the five disciplines of configuration management:
- configuration management planning,
- configuration identification,
- change control,
- configuration status accounting and
- configuration audit.[3]
An annex presents the structure and content of a configuration management plan.[4]
History
In 1979, the Technical Committee ISO/TC 176 "Quality management and quality assurance" started standardization work in the field of quality management and developed the standard ISO 9000.
In 1982, Subcommittee SC 2 "Quality management Systems" was established. SC2 developed ISO 9001 on requirements for quality management systems, ISO 9004 as guidance to achieve sustained success, ISO 10005 as guidance on quality plans, ISO 10006 as guidance on quality management in projects and ISO 10007 as guidance on configuration management.
The first version of ISO 10007 was published in 1995. The second version of ISO 10007 followed in 2003, and the current and third version of ISO 10007 was released in 2017.
Relating standards
Mapping ISO 10007:2003 to IEEE Std 828-2012 exists.[5]
Further, ISO 10007 is relating to the following standards:[2][6]
- ISO 9001:2015, Quality management systems — Requirements
- ISO 9004, Managing for the sustained success of an organization — A quality management approach
- ISO 10006, Quality management systems — Guidelines for quality management in projects
See also
- IEEE 828
- Software quality
- Safety-critical system (CM required by safety standards[7]
References
- ^ a b AS9100D Quality Management Systems - Requirements for Aviation, Space, and Defense Organizations. SAE International. 2016. p. 47.
- ^ a b "ISO 10007:2017 Quality management — Guidelines for configuration management". www.iso.org. Retrieved 2021-04-21.
- ^ a b ISO 10007:2017 Quality management — Guidelines for configuration management (ISO Catalogue preview). International Organization for Standardization.
- ^ a b "Configuration Management". whittingtonassociates.com. Whittington Associates. July 2017.
- ^ "IEEE Standard for Configuration Management in Systems and Software Engineering". IEEE STD 828-2012 (Revision of IEEE STD 828-2005): 1–71. March 2012. doi:10.1109/IEEESTD.2012.6170935. ISBN 978-0-7381-7232-3.
- ^ "ISO 10007:2017". ISO. Retrieved 2021-04-21.
- ^ "Let's Talk About Configuration Management and ISO 26262". www.exida.com. Retrieved 2021-04-21.
This page was last edited on 21 April 2024, at 17:49