| Whitehead Mark 3 torpedo | |
|---|---|
 Mark 3 Whitehead torpedo fired from East Dock, Goat Island, Newport Torpedo Station, Rhode Island, 1894 | |
| Type | Anti-surface ship torpedo[1] |
| Place of origin | Austria-Hungary |
| Service history | |
| In service | 1898–1922[1] |
| Used by | United States Navy[2] |
| Production history | |
| Designer | Robert Whitehead |
| Designed | 1893[1] |
| Manufacturer | Torpedofabrik Whitehead & Co.[3] E. W. Bliss Company |
| Specifications | |
| Mass | 845 pounds[1] |
| Length | 140 inches (3.55 meters)[1] |
| Diameter | 17.7 inches (45 centimeters)[1] |
| Effective firing range | 800 yards[1] |
| Warhead | wet guncotton[1] |
| Warhead weight | 118 pounds[1] |
Detonation mechanism | War Nose Mk 1 contact exploder[1] |
| Engine | 3-cylinder[1] |
| Maximum speed | 26.5 knots[1] |
Guidance system | gyroscope[1] |
Launch platform | battleships and torpedo boats |
The Whitehead Mark 3 torpedo was a Whitehead torpedo adopted by the United States Navy for use in an anti-surface ship role after the E. W. Bliss Company of Brooklyn, New York secured manufacturing rights in 1892.[2]
The primary difference between the Mark 3 and the previous versions of the 3.55-meter Whiteheads was the inclusion of the Obry steering gyro for azimuth control. This device reduced the maximum deviation right or left of the target from 24 to 8 yards.[4] About 100 Mark 3s were purchased from the E. W. Bliss Company; in 1913, these were redesignated Torpedo Type A.[5] They were used on submarines of the A, B, C and D classes. These were withdrawn from service use in 1922 when all torpedoes designed before the Bliss-Leavitt Mark 7 torpedo were condemned.[1]
YouTube Encyclopedic
-
1/3Views:798 558217 9395 835
-
Howell Torpedo 1896 (Revised)
-
Brennan Torpedo 1887
-
Torpedo Testing (1949)
Transcription
Characteristics
The Mark 3 was ordinarily assembled into three sections: the warhead, the air flask and the after-body. The warhead's charge of wet guncotton weighed 118 pounds. The Mark 3 was what was known as a "cold-running" torpedo.[1] The three-cylinder engine ran on cold, compressed air which was stored in the air flask. The after-body carried the engine and the tail, which contained the propellers.[6]
The Mark 3 was launched from battleships and torpedo boats.
See also
References
- ^ "Chronology: Torpedo in Word and Picture". Archived from the original on 6 April 2014. Retrieved 8 June 2013.
- ^ "United States of America Torpedoes Pre-World War II". Retrieved 24 June 2013.
- ^ Silverstone, Paul (2006). The New Navy, 1883-1922. Taylor & Francis Group. pp. xxiii. ISBN 0-415-97871-8.
- ^ The Whitehead Torpedo. Bureau of Ordnance, United States Navy. 1898.
This page was last edited on 9 March 2023, at 14:10