Solid-state lighting (SSL) is a type of lighting that uses semiconductor light-emitting diodes (LEDs), organic light-emitting diodes (OLED), or polymer light-emitting diodes (PLED) as sources of illumination rather than electrical filaments, plasma (used in arc lamps such as fluorescent lamps), or gas.
Solid state electroluminescence is used in SSL, as opposed to incandescent bulbs (which use thermal radiation) or fluorescent tubes. Compared to incandescent lighting, SSL creates visible light with reduced heat generation and less energy dissipation. Most common "white LEDs” convert blue light from a solid-state device to an (approximate) white light spectrum using photoluminescence, the same principle used in conventional fluorescent tubes.
The typically small mass of a solid-state electronic lighting device provides for greater resistance to shock and vibration compared to brittle glass tubes/bulbs and long, thin filament wires. They also eliminate filament evaporation, potentially increasing the life span of the illumination device.
Solid-state lighting is often used in traffic lights and is also used in modern vehicle lights, street and parking lot lights, train marker lights, building exteriors, remote controls etc.[1] Controlling the light emission of LEDs may be done most effectively by using the principles of nonimaging optics.[2] Solid-state lighting has made significant advances in industry. In the entertainment lighting industry, standard incandescent tungsten-halogen lamps are being replaced by solid-state lighting fixtures.[3]
YouTube Encyclopedic
-
1/3Views:8843121 254
-
Webinar: Introduction to Solid-State Lighting
-
The Use of Solid State Lighting in Engineering
-
Explaning Solid State Lighting
Transcription
See also
References
- ^ California Sustainability Alliance Solid State Lighting, Received July 24th, 2010
- ^ Chaves, Julio (2015). Introduction to Nonimaging Optics, Second Edition. CRC Press. ISBN 978-1482206739.
- ^ Kho, Mu-Jeong, Javed, T., Mark, R., Maier, E., and David, C. (2008) 'Final Report: OLED Solid State Lighting: Kodak European Research' MOTI (Management of Technology and Innovation) Project, Judge Business School of the University of Cambridge and Kodak European Research, Final Report presented on 4 March 2008 at Kodak European Research at Cambridge Science Park, Cambridge, UK, pages 1-12
Further reading
- Assessment of Advanced Solid State Lighting. National Academies Press. 2013. doi:10.17226/18279. ISBN 978-0-309-27011-3.
- Kho, Mu-Jeong, Javed, T., Mark, R., Maier, E., and David, C. (2008) 'Final Report: OLED Solid State Lighting: Kodak European Research' MOTI (Management of Technology and Innovation) Project, Judge Business School of the University of Cambridge and Kodak European Research, Final Report presented on 4 March 2008 at Kodak European Research at Cambridge Science Park, Cambridge, UK, pages 1–12.
External links
- EUROPEAN METROLOGY RESEARCH PROJECT - METROLOGY FOR SOLID STATE LIGHTING
- Solid State Lighting, International Energy Agency research project
- DOE SSL roadmap
- Lighting Research Center - Solid-State Lighting Program
- OLLA: finished European academic-industrial research project into OLED lighting
- OLED100.EU: successor to the OLLA project
| Concepts |    | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Methods of generation |
| ||||||||||||
| Stationary | |||||||||||||
| Portable | |||||||||||||
| Automotive | |||||||||||||
| |||||||||||||
| |||||||||||||
| |||||||||||||
| Related topics | |||||||||||||
This page was last edited on 10 January 2024, at 19:00