To install click the Add extension button. That's it.

The source code for the WIKI 2 extension is being checked by specialists of the Mozilla Foundation, Google, and Apple. You could also do it yourself at any point in time.

How to transfigure the Wikipedia

Would you like Wikipedia to always look as professional and up-to-date? We have created a browser extension. It will enhance any encyclopedic page you visit with the magic of the WIKI 2 technology.

Try it — you can delete it anytime.

Install in 5 seconds
4,5
Kelly Slayton
Congratulations on this excellent venture… what a great idea!
Alexander Grigorievskiy
I use WIKI 2 every day and almost forgot how the original Wikipedia looks like.
Live Statistics
English Articles
Improved in 24 Hours
Added in 24 Hours
What we do. Every page goes through several hundred of perfecting techniques; in live mode. Quite the same Wikipedia. Just better.
Great Wikipedia has got greater.
.
Leo
Newton
Brights
Milds

SAE J2452

From Wikipedia, the free encyclopedia

SAE J1269 and SAE J2452 performed on new tires

SAE J2452 is a standard defined by the Society of Automotive Engineers[1] to measure the rolling resistance of tires.[2] Where the older standard, SAE J1269, produces measurements of rolling resistance under steady-state (i.e. thermally equilibrated) operating conditions, SAE J2452 produces measurements during a transient history of speed that is intended to mimic a vehicle coastdown event. During the SAE J2452 test, the tire is not in thermal equilibrium, but the coastdown event is rapid enough that the tire operates at a roughly iso-thermal condition.[3]

Either procedure may be used to investigate the effects of different vehicle loads (weight), tire pressures and vehicle speeds.

The rolling resistance coefficient (RRC) indicates the amount of force required to overcome the hysteresis of the material as the tire rolls. Tire pressure, vehicle weight and velocity all play a role in how much force is lost to rolling resistance.

The basic model equation for SAE J2452 is:

Rolling Resistance ( N / Lbs) = Pα Zβ (a + bV + cV2)

where:

P is the tire inflation pressure ( kPa / psi)
Z is the applied load for vehicle weight ( N /Lbs)
V is the vehicle speed ( km/h / mph)
alpha, beta, a, b, c are the coefficients for the model.

The units of the coefficients are matched to the units used in the model, i.e. (metric / Imperial).

References

  1. ^ "Stepwise Coastdown Methodology for Measuring Tire Rolling Resistance J2452_201707". sae.org. SAE. Retrieved 3 February 2024.
  2. ^ Hall, D. E.; J. C. Moreland (2001). "Fundamentals of Rolling Resistance". Rubber Chemistry and Technology. 74 (3): 525–539. doi:10.5254/1.3547650.
  3. ^ Mars, W. V.; J. R. Luchini (1999). "An Analytical Model for the Transient Rolling Resistance Behavior of Tires". Tire Science and Technology. 27 (3): 161–175. doi:10.2346/1.2135982.


Stub icon

This automobile-related article is a stub. You can help Wikipedia by expanding it.

Stub icon

This standards- or measurement-related article is a stub. You can help Wikipedia by expanding it.

This page was last edited on 30 April 2024, at 13:57
Basis of this page is in Wikipedia. Text is available under the CC BY-SA 3.0 Unported License. Non-text media are available under their specified licenses. Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc. WIKI 2 is an independent company and has no affiliation with Wikimedia Foundation.
Contact WIKI 2
Introduction
Terms of Service
Privacy Policy