In chemistry, oxychlorination is a process for generating the equivalent of chlorine gas (Cl2) from hydrogen chloride and oxygen.[1] This process is attractive industrially because hydrogen chloride is less expensive than chlorine.[2]
YouTube Encyclopedic
-
1/3Views:8 4022 6934 995
-
Vinyl Chloride Production 1954 BF Goodrich Company
-
Gross Economic Profit Analysis
-
Mod-01 Lec-03 Unit processes and unit operations in organic chemical Industries
Transcription
Mechanism
The reaction is usually initiated by copper(II) chloride (CuCl2), which is the most common catalyst in the production of 1,2-dichloroethane. In some cases, CuCl2 is supported on silica in presence of KCl, LaCl3, or AlCl3 as cocatalysts. Aside from silica, a variety of supports have also been used including various types of alumina, diatomaceous earth, or pumice. Because this reaction is highly exothermic (238 kJ/mol), the temperature is monitored, to guard against thermal degradation of the catalyst. The reaction is as follows:
- CH2=CH2 + 2 CuCl2 → 2 CuCl + ClH2C-CH2Cl
The copper(II) chloride is regenerated by sequential reactions of the cuprous chloride with oxygen and then hydrogen chloride:
- ½ O2 + 2 CuCl → CuOCuCl2
- 2 HCl + CuOCuCl2 → 2 CuCl2 + H2O
Applications
Oxychlorination is employed in the conversion of ethylene into vinyl chloride. In the first step in this process, ethylene undergoes oxychlorination to give ethylene chloride:
- CH2=CH2 + 2 HCl + ½ O2 → ClCH2CH2Cl + H2O
Oxychlorination is of special importance in the making of 1,2-dichloroethane, which is then converted into vinyl chloride. As can be seen in the following reaction, 1,2-dichloroethane is cracked:
- ClCH2CH2Cl → CH2=CHCl + HCl
The HCl from this cracking process is recycled by oxychlorination in order to reduce the consumption of raw material HCl (or Cl2, if direct chlorination of ethylene is chosen as main way to produce 1,2-dichloroethane).[3]
Iron(III) chloride is produced commercially by oxychlorination (and other methods). For example, dissolution of iron ores in hydrochloric acid gives a mixture of ferrous and ferric chlorides:[4]
- Fe3O4 + 8 HCl → FeCl2 + 2 FeCl3 + 4 H2O
The iron(II) chloride is converted to the iron(III) derivative by treatment with oxygen and hydrochloric acid:
- 4 FeCl2 + O2 + 4 HCl → 4 FeCl3 + 2 H2O
References
- ^ M. Rossberg; et al. (2006). "Chlorinated Hydrocarbons". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a06_233.pub2.
- ^ Marshall, K. A. 2003. Chlorocarbons and Chlorohydrocarbons, Survey. Kirk-Othmer Encyclopedia of Chemical Technology
- ^ Chemistry of the Oxychlorination Catalyst: An In situ, Time-resolved, Dispersive XANES Study — ESRF - European Synchrotron Radiation Facility
- ^ Simon A. Cotton (2018). "Iron(III) Chloride and Its Coordination Chemistry". Journal of Coordination Chemistry. 71 (21): 3415–3443. doi:10.1080/00958972.2018.1519188. S2CID 105925459.
This page was last edited on 26 October 2023, at 18:23