NOTE: This organization doesn't seem to exist anymore, the http://www.ohanda.org/ URL has been found to be inactive in January 2023.
The Open Hardware and Design Alliance (OHANDA) aims at encouraging the sharing of open hardware and designs. The core of the project is a free online service where manufacturers of Open hardware and designs can register their products with a common label. This label maps the four freedoms of Free Software to physical devices and their documentation. It is similar to a non-registered trademark for hardware and can be compared to other certificates such as U.S. Federal Communications Commission (FCC) or CE mark. OHANDA thus has the role of a self-organized registration authority.
YouTube Encyclopedic
-
1/3Views:44 9891 043168 595
-
My personal fight against the modern laptop
-
Why are startups in hardware missing the spotlight?
-
Android: How Google Conquered the Smartphone Industry
Transcription
License
The Open Hardware and Design Alliance has rewritten the four freedoms of free software as follows to match them to hardware resp. hardware documentation:
- Freedom 0: The freedom to use the device for any purpose.
- Freedom 1: The freedom to study how the device works and change it to make it to do what you wish. Access to the complete design is precondition to this.
- Freedom 2: Redistribute the device and/or design (remanufacture).
- Freedom 3: The freedom to improve the device and/or design, and release your improvements (and modified versions in general) to the public, so that the whole community benefits. Access to the complete design is precondition to this.
The idea to create a label that makes open hardware and designs recognizable is because copyright and copyleft are hard to realize in the context of physical devices. Instead of going through the lengthy and expensive process of patenting hardware to make it open, hardware developers and designers can put their products under a public domain license by registering them on the OHANDA website. They can license their work under their own names and keep the devices' reuse open.
The procedure is the following: A hardware designer or manufacturer creates an account on the OHANDA website to get a unique producer ID. This account can either be for a person or for an organization. The terms and conditions he accepts to use the label imply that she grants the Four Freedoms to the users. The documentation of the product must be published under a "copyleft" or public domain license. Next, the manufacturer registers the product or design. A unique product ID will be issued. This ID is also referred to as the "OKEY". Now the manufacturer or designer can print or engrave the OHANDA label and the OKEY onto the device. This way, the device always carries the link to the open documentation and to all past contributors. Via the OHANDA website, users can trace back the artefact. At the same time, the label makes the openness of the product visible. Everyone is free to change the device and to share the new design with a new product ID on the website. The development can be seen by following the associations online.[1]
Development
The idea of creating a label for open source hardware came up at the GOSH! Summit (Grounding Open Source Hardware) at Banff Centre in Banff, Alberta in July 2009.[2] Since then, the active community members developed the project website[3] where OHANDA-labeled hardware can be registered. OHANDA launched a sticker campaign: The stickers show a crossed out closed box, symbolizing closed "black boxes". The stickers are meant to be put on all sorts of devices to make visible how little open source devices exist.
In 2011, OHANDA community members met at the Piksel11 festival in Bergen/Norway.[4] Since then, they have been using the term "reables" as a replacement for "Free/Libre Open Source Hardware".[5]
See also
- Open hardware
- List of open source hardware projects
- Commons-based peer production
- DIY
- Electronic design automation
- Engineers Without Borders
- Free content
- Free software
- Graphics hardware and FOSS
- Open Compute Project
- Open content
- Open design – Open-source physical design with a wider focus
- Open source
- Open Source Ecology – Free farming machines
- Open-source robotics
- Open Source Appropriate Technology – open-source hardware specifically focusing on appropriate technology for sustainable development
- Open-source software
- Patent
- Peer production
References
- ^ "OHANDA / JÜRGEN NEUMANN | Open Design Now".
- ^ "Programs | Banff Centre".
- ^ "4xFreedoms | Open Source Hardware and Design Alliance". Archived from the original on 2012-11-05. Retrieved 2012-11-24.
- ^ http://piksel.no/ocs/index.php/piksel/piksel11/paper/view/777[dead link]
- ^ http://www.ohanda.org/reables
External links
- Open Hardware And Design Alliance - Project Website
- OHANDA: List of registered products
- GOSH! Summit 2009
- Bas van Abel/Roel Klaassen/Lucas Evers/Peter Troxler (ed.): Open Design Now, BIS publishers, Amsterdam, 2011 Online version of Open Design Now, CC BY-NC-SA-3.0 licensed
This page was last edited on 23 December 2023, at 17:12