Memory architecture

Memory architecture describes the methods used to implement electronic computer data storage in a manner that is a combination of the fastest, most reliable, most durable, and least expensive way to store and retrieve information. Depending on the specific application, a compromise of one of these requirements may be necessary in order to improve another requirement. Memory architecture also explains how binary digits are converted into electric signals and then stored in the memory cells. And also the structure of a memory cell.

For example, dynamic memory is commonly used for primary data storage due to its fast access speed. However dynamic memory must be repeatedly refreshed with a surge of current dozens of time per second, or the stored data will decay and be lost. Flash memory allows for long-term storage over a period of years, but it is much slower than dynamic memory, and the static memory storage cells wear out with frequent use.

Similarly, the data bus is often designed to suit specific needs such as serial or parallel data access, and the memory may be designed to provide for parity error detection or even error correction.

The earliest memory architectures are the Harvard architecture, which has two physically separate memories and data paths for program and data, and the Princeton architecture which uses a single memory and data path for both program and data storage.^[1]

Most general purpose computers use a hybrid split-cache modified Harvard architecture that appears to an application program to have a pure Princeton architecture machine with gigabytes of virtual memory, but internally (for speed) it operates with an instruction cache physically separate from a data cache, more like the Harvard model.^[1]

DSP systems usually have a specialized, high bandwidth memory subsystem; with no support for memory protection or virtual memory management.^[2] Many digital signal processors have 3 physically separate memories and datapaths -- program storage, coefficient storage, and data storage. A series of multiply–accumulate operations fetch from all three areas simultaneously to efficiently implement audio filters as convolutions.

See also

• 8-bit
• 16-bit
• 32-bit
• 64-bit
• Address generation unit
• Cache-only memory architecture (COMA)
• Cache memory
• Conventional memory
• Deterministic memory
• Distributed memory
• Distributed shared memory (DSM)
• Dual-channel architecture
• ECC memory
• Expanded memory
• Extended memory
• Flat memory model
• Harvard architecture
• High memory area (HMA)
• Lernmatrix
• Memory hierarchy
• Memory level parallelism
• Memory model (addressing scheme)
• Memory model
• Memory protection
• Memory-disk synchronization
• Memory virtualization
• Non-uniform memory access (NUMA)
• PCI memory hole
• Processor register
• Registered memory
• Shared memory (interprocess communication)
• Shared memory architecture (SMA)
• Stack-based memory allocation
• Tagged architecture
• Uniform memory access (UMA)
• Universal memory
• Video memory
• von Neumann architecture
• X86 memory segmentation

References

This computing article is a stub. You can help Wikipedia by expanding it.

• v
• t
• e

This page was last edited on 7 August 2022, at 14:50