To install click the Add extension button. That's it.

The source code for the WIKI 2 extension is being checked by specialists of the Mozilla Foundation, Google, and Apple. You could also do it yourself at any point in time.

4,5
Kelly Slayton
Congratulations on this excellent venture… what a great idea!
Alexander Grigorievskiy
I use WIKI 2 every day and almost forgot how the original Wikipedia looks like.
Live Statistics
English Articles
Improved in 24 Hours
Added in 24 Hours
Languages
Recent
Show all languages
What we do. Every page goes through several hundred of perfecting techniques; in live mode. Quite the same Wikipedia. Just better.
.
Leo
Newton
Brights
Milds

Martini–Enfield

From Wikipedia, the free encyclopedia

Martini–Enfield Mk I & Mk II
Martini-Enfield carbine. From the Swedish Army Museum.
TypeService rifle
Place of originUnited Kingdom
Service history
In service1895–1918
Used byUnited Kingdom & Colonies
Afghanistan
WarsBritish colonial wars, Second Boer War (Limited)
World War I (Limited)
Production history
DesignerRSAF Enfield
Designed1895
ManufacturerRSAF Enfield
Produced1895–1903
No. builtapprox. 250,000–500,000
VariantsMk II Carbine
Specifications
Mass8.5 pounds (3.9 kg) empty
Length49.25 inches (1,251 mm)
Barrel length30.2 inches (770 mm) (rifle)
21.3 inches (540 mm) (carbine)

Cartridge.303 Mk IIC SAA Ball
Calibre.303 British
ActionMartini Falling Block
Rate of fire10 rounds per minute
Muzzle velocity2,200 feet per second (670 m/s)
Effective firing range1,000 yards (910 m)
Maximum firing range2,000 yards (1,800 m)
Feed systemSingle shot
SightsSliding ramp rear sights, fixed-post front sights

Martini–Enfield rifles were, by and large, conversions of the .577/450 Martini–Henry rifle, rechambered for use with the newly introduced .303 British cartridge. Whilst most Martini–Enfields were converted rifles, a number were newly manufactured as well.

YouTube Encyclopedic

  • 1/3
    Views:
    1 493
    198 532
    8 699
  • Martini Henry History and Martini Enfield History and Review
  • Platypus or Prototype? Authenticating a Hybrid Entini
  • MARTINI ENFIELD 303 CFC 2018

Transcription

Overview

The Martini–Enfield Mk I was a Martini–Henry Mk III rebarrelled to .303 and with a new extractor installed, whilst the Martini–Enfield Mk II rifles were generally of new manufacture, although there are examples of converted Mk II rifles.

Originally (from 1889) Martini–Henry conversions used Metford rifled barrels (and were known as Martini–Metford rifles), which were more than suitable for the first .303 cartridges, which used black powder as a propellant but wore out very quickly when fired with cordite/nitrocellulose cartridges (introduced in 1895). In 1895, the Enfield rifled barrel was introduced, which was much more suitable for use with "modern" (smokeless) ammunition.

The Martini–Enfield saw service with Australian colonial forces during the Second Anglo-Boer War (1899–1902).

The Martini–Enfield was in service from 1895–1918 (Lawrence of Arabia's Arab Irregulars were known to have used them during the Arab Revolt of 1916–1918, along with any other firearms they could acquire) and it remained a Reserve Arm in places like India and New Zealand until well into World War II.

Martini–Enfield rifles were manufactured/converted by:

  • RSAF (Royal Small Arms Factory), Enfield Lock
  • LSA Co (London Small Arms Co)
  • BSA & M Co (Birmingham Small Arms & Metals Co, later simply BSA)
  • HRB Co (Henry Rifle Barrel Co, later went out of business and taken over by Blenheim Engineering)
  • NA&A Co (National Arms & Ammunition Co)

Martini–Enfield rifles were very well made and are more than capable of handling modern commercial .303 British ammunition, but, as with all second hand firearms, they should always be checked by a competent gunsmith before attempting to fire them. In advance to the Mk VII spitzer bullet introduction, a Mk III proof round with 20% higher pressure was introduced in 1908; rifles modified earlier and proven with previous marks may have a modified blackpowder-era breech block slightly weakened with the insertion of a new face, but the rifles with newly made breech blocks should withstand even WWII military surplus ammo.

Khyber Pass Copies

The Khyber Pass region between Pakistan and Afghanistan has long had a reputation for producing unlicensed, home-made copies of firearms using whatever materials are available-more often than not, railway sleepers, junked motor vehicles, and scrap metal.

During the various British military expeditions in the North-West Frontier, the locals acquired examples of the Martini–Henry, Martini–Enfield, and later, Lee–Enfield rifles and began to make their own copies.

The quality on such rifles varies from "As good as a factory-produced example" to "dangerously unsafe", tending towards the latter end of the scale.[citation needed] The ammunition used in the region is often underloaded, being made from a variety of powders—or even old film (which contains nitrocellulose, a key component of smokeless powder). As such, Khyber Pass Copy rifles cannot generally stand up to the pressures generated by modern commercial ammunition, because of the significant possibility of severe injury or death to the operator it is generally advised that such weapons should not be fired under any but the most extremely unlikely rare and desperate circumstances, although some collectors have made mild handloaded cartridges for their Khyber Pass rifles.[citation needed] This practice is not recommended, and anyone firing a Khyber Pass rifle is doing so at their own risk.

Khyber Pass Copies can be recognised by a number of factors, notably:

  • Spelling errors in the markings (the most common of which is a backwards "N" in "Enfield")
  • V.R. (Victoria Regina) cyphers dated after 1901—Queen Victoria died in 1901, so any rifles made after this should be stamped "E.R." (Edward Rex, referring to King Edward VII)
  • Generally inferior workmanship, including weak/soft metal, poorly finished wood, and badly struck markings.

Many different versions of the original Enfield rifles are on sale at UN, United States or NATO-authorized bazaars usually adjacent to or within military or diplomatic installations in Afghanistan. Until that time, it was common to find a great variety of 'Khyber pass' fake weapons. These ranged a gamut of Martini–Henrys, Snider-converted original Enfield pattern 1853s, blatant knockoffs of the Martini–Henry rifles that lacked all British markings completely and were often engraved with popular Middle Eastern geometric and scrollwork designs. After the limitations regarding the loading method cut the supply of these being brought into bazaars went into effect, many of the vendors simply resorted to bringing fake muzzle-loading British pattern 1853 'Tower' rifles to sell as send-home replicas. While some vendors may claim them to be made by Enfield, most usually make no claim at all regarding their authenticity.

References

Small Arms Identification Series No. 15: .450 & .303 Martini Rifles & Carbines (2002) Skennerton, Ian, Arms & Militaria Press, Gold Coast, QLD

External links

  • martinihenry.com—An excellent source of information on the Martini–Henry and Martini–Enfield rifles.
  • Murray, Lieut-Colonel P L (1911). Official Records of the Australian Military Contingets to the War in South Africa. Vol. 1. Melbourne: Australian Government Printer.
This page was last edited on 4 May 2024, at 06:24
Basis of this page is in Wikipedia. Text is available under the CC BY-SA 3.0 Unported License. Non-text media are available under their specified licenses. Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc. WIKI 2 is an independent company and has no affiliation with Wikimedia Foundation.