Hanover bars, in one of the PAL television video formats, are an undesirable visual artifact in the reception of a television image.[1][2] The name refers to the city of Hannover, in which the PAL system developer Telefunken Fernseh und Rundfunk GmbH was located.
The PAL system encodes color as YUV. The U (corresponding to B-Y) and V (corresponding to R-Y) signals carry the color information for a picture, with the phase of the V signal reversed (i.e. shifted through 180 degrees) on alternate lines (hence the name PAL, or phase alternate line). This is done to cancel minor phase errors in the reception process. However, if gross errors occur, complementary errors from the V signal carry into the U signal, and thus visible stripes occur.[3]
Later PAL systems introduced alterations to ensure that Hanover bars do not occur, introducing a swinging burst to the color synchronization. Other PAL systems may handle this problem differently.
YouTube Encyclopedic
-
1/3Views:1 814514 9883 903 381
-
Example of Hanover Bars
-
Analog Color TV Wrap-Up--Some extra info
-
15 Strangest Things Recently Discovered In Thailand
Transcription
Suppression of Hanover bars
To suppress Hanover bars, PAL color decoders use a delay line that repeats the chroma information from each previous line and blends it with the current line.[4] This causes phase errors to cancel out, at the cost of vertical color resolution, and in early designs, also a loss of color saturation proportional to the phase error.[2]
References
- ^ "45 Years Anniversary of Walter Bruch's PAL Color Television". www.radiomuseum.org.
- ^ a b Dhake, A. M. (May 1, 1999). TV and Video Engineering. Tata McGraw-Hill Education. ISBN 9780074601051 – via Google Books.
- ^ Trundle, Eugene (May 12, 2014). Newnes Guide to TV and Video Technology. Elsevier. ISBN 9781483183169 – via Google Books.
- ^ "Worldwide Standards for Analog Television". National Association of Broadcasters Engineering Handbook. Academic Press. 2007.
See also
This page was last edited on 24 February 2024, at 15:54