An explosive gas leak detector is a device used to detect explosive gas leaks in enclosed spaces. Typically, a local alarm will be triggered, and optionally a remote alarm may also be connected.
Application
Carbon monoxide detectors will not detect explosive mixtures; thus the device is often recommended to complement the CO detector. Combination explosive gas leak and carbon monoxide detectors exist.[1][2]
Placement
A detector for propane is best placed down low near the floor, as propane is heavier than air.[3] A detector for natural gas (city gas) is best placed up high, near the ceiling.[3] Some detectors can detect both natural gas or propane, but this requires a compromise location.[4]
References
- ^ Fixed flammable gas detector systems on offshore installations: optimization and assessment of effectiveness (PDF) (Technical report). UK Health and Safety Executive. 2017. Research Report RR1123.
- ^ Tross, Kasey (2024-01-09). "The Best Gas Leak Detectors". SafeWise. Retrieved 2024-05-23.
- ^ a b "What is Natural Gas". CT.gov - Connecticut's Official State Website. Retrieved 2022-08-14.
- ^ "Kos Galatsis - Environmental air quality monitoring solutions". Retrieved 2024-05-23.
 | This electronics-related article is a stub. You can help Wikipedia by expanding it. |
This page was last edited on 23 May 2024, at 17:52