To install click the Add extension button. That's it.

The source code for the WIKI 2 extension is being checked by specialists of the Mozilla Foundation, Google, and Apple. You could also do it yourself at any point in time.

4,5
Kelly Slayton
Congratulations on this excellent venture… what a great idea!
Alexander Grigorievskiy
I use WIKI 2 every day and almost forgot how the original Wikipedia looks like.
Live Statistics
English Articles
Improved in 24 Hours
Added in 24 Hours
What we do. Every page goes through several hundred of perfecting techniques; in live mode. Quite the same Wikipedia. Just better.
.
Leo
Newton
Brights
Milds

Dynamic load testing

From Wikipedia, the free encyclopedia

Dynamic load testing (or dynamic loading) is a method to assess a pile's bearing capacity by applying a dynamic load to the pile head (a falling mass) while recording acceleration and strain on the pile head. Dynamic load testing is a high strain dynamic test which can be applied after pile installation for concrete piles. For steel or timber piles, dynamic load testing can be done during installation or after installation.

The procedure is standardized by ASTM D4945-00 Standard Test Method for High Strain Dynamic Testing of Piles. It may be performed on all piles, regardless of their installation method. In addition to bearing capacity, Dynamic Load Testing gives information on resistance distribution (shaft resistance and end bearing) and evaluates the shape and integrity of the foundation element.

The foundation bearing capacity results obtained with dynamic load tests correlate well with the results of static load tests performed on the same foundation element.[citation needed]

YouTube Encyclopedic

  • 1/3
    Views:
    4 159
    2 039
    5 384
  • Dynamic Load Testing (PDA Test) of Drilled Shafts
  • How To Perform Dynamic Load Test of Pile | Step-By-Step Process | Advantages of D.L.T. of Pile
  • Dynamic Pile Test | Full procedure explained on site | Civil Engineers

Transcription

See also

References

  • Rausche, F., Moses, F., Goble, G. G., September, 1972. Soil Resistance Predictions From Pile Dynamics. Journal of the Soil Mechanics and Foundations Division, American Society of Civil Engineers. Reprinted in Current Practices and Future Trends in Deep Foundations, Geotechnical Special Publication No. 125, DiMaggio, J. A., and Hussein, M. H., Eds, August, 2004. American Society of Civil Engineers: Reston, VA; 418–440.
  • Rausche, F., Goble, G.G. and Likins, G.E., Jr. (1985). Dynamic Determination of Pile Capacity. Journal of the Geotechnical Engineering Division, 111(3), 367–383.
  • Salgado, R. (2008). The Engineering of Foundations. New York:McGraw-Hill, Chapter 14 (pp. 669-713).
  • Scanlan, R.H., and Tomko, J.J., 1960, "Dynamic Prediction of Pile Static Bearing Capacity", Journal of the Soil Mechanics and Foundations Division, American Society of Civil Engineers, Vol. 86, No. SM4; 35-61

External links

This page was last edited on 5 February 2024, at 08:26
Basis of this page is in Wikipedia. Text is available under the CC BY-SA 3.0 Unported License. Non-text media are available under their specified licenses. Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc. WIKI 2 is an independent company and has no affiliation with Wikimedia Foundation.