Simul climbing

Part of a series on
Climbing
Simul climbing on the traverse of the Aiguilles d'Entrèves (AD 4c)
Lists
Climbers Piolet d'Or winners IFSC victories Equipment Knots Historical events Grade milestones Eight-thousanders Terminology
Types of rock climbing
Aid Big wall Multi-pitch Bouldering Highball Competition Speed Free Sport Traditional Solo Free solo Deep-water solo Rope solo Top roping
Types of mountaineering
Alpine Mixed Via ferrata Himalayan Alpine style Expedition style Ice Dry-tooling Scrambling Hillwalking
Other types
Buildering Canyoning Crane Grass Commercial Parkour Pole Rock hopping Rooftopping Roof hacking Slide Tree
Key actions
Abseiling Belaying Leading Redpointing Jumaring Self rescuing Simul climbing Techniques Traversing
Key terms
Anchor First ascent FFA FFFA Grade Route Beta Guide Pitch
v t e

Simul climbing, also known as climbing with a running belay,^[1] is a climbing method or style where all the climbers climb at the same time while tied into the same rope. Protection is placed by the first member of the rope team and the last member removes the pieces of gear. The length of rope used during simul climbing varies but is often between 15–30 metres (50–100 ft). In most cases, the climbing team maintains multiple pieces of protection between them to prevent a system failure if one of the pieces was to fail. Usually, a belay device is not used. However, the first climber may be belayed by the second until enough rope is out for the leader to avoid a ground fall. Similarly, the leader may use a belay device as the second approaches a belay station to avoid the potential for a large fall.

Fall potential

The roles of the leader and second in simul climbing are very different than they are in free climbing. If the leader falls during free climbing, the second (follower) is pulled up from their belay station. In simul climbing, if the leader falls, the second is pulled up from wherever they are climbing. The hazards of a fall for the second climber relative to the lead climber are more similar than they are when they are free climbing.

Nonetheless, the hazards during a fall are significantly different for simul climbing when compared to free climbing. For example, in simul climbing, the leader can be pulled off the rock when the second climber falls unexpectedly. If both climbers are climbing on or above an overhang and either falls, they may both fall away from the rock and be left hanging by their rope beneath the overhang. This would require them to climb the rope, or swing themselves, or adjust their weight difference significantly so that one of them can reach the rock again.

In free climbing, the second climber traditionally belays from a stationary belay position and is not in a position to fall. In simul climbing the second is actively climbing and can sustain a fall. If the second falls while simul climbing the leader catches the fall with their own body. This jolt has a high likelihood of pulling the leader off the rock towards their last piece of gear. This sort of fall has the potential to be devastating for the leader. To avoid this possibility it is traditional to put the better climbers second so that they will not fall.

Variations

Simul climbing or variations of simul climbing are commonly used while speed climbing.

A common French form of simul climbing is the Corde tendue [fr].

See also

Wikimedia Commons has media related to Simul climbing.

• Alpine climbing
• Mixed climbing
• Rope team

References

This page was last edited on 13 May 2024, at 19:17