Seismic loading is one of the basic concepts of earthquake engineering which means application of an earthquake-generated agitation[1] to a structure. It happens at contact surfaces of a structure either with the ground,[2] or with adjacent structures,[3] or with gravity waves from tsunami.
Seismic loading depends, primarily, on:
- Anticipated earthquake's parameters at the site - known as seismic hazard
- Geotechnical parameters of the site
- Structure's parameters
- Characteristics of the anticipated gravity waves from tsunami (if applicable).
Sometimes, seismic load exceeds ability of a structure to resist it without being broken, partially or completely Due to their mutual interaction, seismic loading and seismic performance of a structure are intimately related.[4]
YouTube Encyclopedic
-
1/3Views:7 69720 5014 541
-
Introduction to Earthquake Loading in Structures | Structural Design & Loading
-
Seismic Conceptual Design of Building I Principles I Earthquake Resistant Design
-
Calculating The Seismic Design Force And Seismic Base Shear For Reinforced Concrete Building
Transcription
See also
References
- ^ Hudson, Donald E. (1990) [1979]. Reading and Interpreting Strong Motion Accelerograms. Engineering monographs on earthquake criteria, structural design, and strong motion records. Vol. 1. EERI. ISBN 0-685-14388-0.
- ^ The Geotechnical Earthquake Engineering Portal
- ^ Seismic Pounding between Adjacent Building Structures
- ^ Reitherman, Robert (2012). Earthquakes and Engineers: An International History. Reston, VA: ASCE Press. ISBN 9780784410714.
 | This seismology article is a stub. You can help Wikipedia by expanding it. |
This page was last edited on 2 June 2018, at 08:12